ADAPTER AS 1070779 - Caterpillar

Table 1
EMS Calibration Error Codes    
Error Code     Description    
E01     Active Clutch Solenoid or Speed Sensor Fault    
E02     Engine Speed Not Zero    
E03     Sensor Calibration failure    
E04     Transmission Direction Lever is Not In Neutral    
E05     Transmission Oil Temp Below Threshold (60C)    
E06     Engine RPM Incorrect    
E07     Parking Brake is not On    
E08     Active Sensor CID 299 Fault    
E09     Machine Speed Not Zero    
E10     Service Brake Pedal Pressed    
E11     Hydraulic Oil Temp Not within limits    
E12     Engine Speed Not at High Idle (>1800 RPM)    
E13     Engine Speed Not at Low Idle (<1000 RPM)    
E14     Implement Lockout Switch Not in the Locked Position.    
E15     Implement Lockout Switch Not in the Not Locked Position    
E16     Transmission Direction Lever Not in Forward    
E17     EMS Calibration Aborted    
E18     Parking Brake Engaged    
E19     Engine RPM Incorrect    
E21     Transmission Clutch 1 At A Limit    
E22     Transmission Clutch 2 At A Limit    
E23     Transmission Clutch 3 At A Limit    
E24     Transmission Clutch 4 At A Limit    
E25     Transmission Clutch 5 At A Limit    
E26     Another Calibration is active    
E27     Calibration active by another ECM    
E28     Calibration aborted by tool/monitor    
E29     Transmission oil temp too high    
E30     Torque converter output speed too low    
E31     Torque converter ratio unstable