1073554 ADAPTER-TIP Caterpillar parts
980G II, 980H, 980K, 988F II, 988G, 990, 990 II, 990H, 992C, 992D, 992G
Rating:
Alternative (cross code) number:
CA1073554
107-3554
1073554
CA1073554
107-3554
1073554
Weight: 78 pounds 35 kg.
Information:
BEVEL ANGLE
22.5
BLUNT HEIGHT MAX
17
mm
EDGE LOCATION
CENTER
EDGE THICKNESS
67.5
mm
GAGE SIZE
J550
NOSE ANGLE
15
WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
CTP 1073554 Heavy Duty Adapter for Model 990, 992, Center
CTP For excavators, loaders, bulldozers and motor graders || Longer wear life || Ripper teeth are used in very hostile environments
CTP For excavators, loaders, bulldozers and motor graders || Longer wear life || Ripper teeth are used in very hostile environments
1073554 Adapter Center (New AFTERMARKET) - G&T Engine Parts
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 86.57 lbs || Dimensions: 10-10-24.26 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
G&T Engine Parts Condition: NEW AFTERMARKET || Weight: 86.57 lbs || Dimensions: 10-10-24.26 in || Items are sold by part number only. Picture is for illustration purposes and the part or parts may be different in color or quantity. || Use of any OEM manufacturer name is not intended to represent any relationship between the two companies, instead it indicates that we sell replacement parts that are compatible with OEM components.
Compatible equipment models: 1073554:
Information:
The most accurate check of the oil level is performed when the engine is stopped. Perform this maintenance on a surface that is as level as possible.
Illustration 1 g00748492
(1) Oil level gauge (dipstick)
(2) Oil filler
Illustration 2 g00748491
(3) "ENGINE STOPPED WITH OIL COLD" side
(4) "ENGINE AT LOW IDLE WITH WARM OIL" side
(5) "ADD" mark
(6) "FULL" mark
Ensure that oil level gauge (1) is seated.
If the engine is stopped, remove oil level gauge (1). Observe the oil level on "ENGINE STOPPED WITH OIL COLD" side (3).
If the engine is operating, reduce the engine speed to low idle. Remove oil level gauge (1) and observe the oil level on "ENGINE AT LOW IDLE WITH WARM OIL" side (4). The oil level should be between "ADD" mark (5) and "FULL" mark (6).
Engine damage can occur if the crankcase is filled above the "FULL" mark on the oil level gauge (dipstick).An overfull crankcase can cause the crankshaft to dip into the oil. This will reduce the power that is developed and also force air bubbles into the oil. These bubbles (foam) can cause the following problems: reduction of the oil's ability to lubricate, reduction of oil pressure, inadequate cooling, oil blowing out of the crankcase breathers and excessive oil consumption.Excessive oil consumption will cause deposits to form on the pistons and in the combustion chamber. Deposits in the combustion chamber lead to the following problems: guttering of the valves, packing of carbon under the piston rings and wear of the cylinder liner.If the oil level is above the "FULL" mark on the oil level gauge, drain some of the oil immediately.
If necessary, remove oil filler cap (2) and add oil. For the correct oil to use, see this Operation and Maintenance Manual, "Refill Capacities and Recommendations" topic (Maintenance Section). Do not fill the crankcase above "FULL" mark (6). Clean the oil filler cap. Install the oil filler cap.
Record the amount of oil that is added. For the next oil sample and analysis, include the total amount of oil that has been added since the previous oil change. This will help to provide the most accurate oil analysis.
Illustration 1 g00748492
(1) Oil level gauge (dipstick)
(2) Oil filler
Illustration 2 g00748491
(3) "ENGINE STOPPED WITH OIL COLD" side
(4) "ENGINE AT LOW IDLE WITH WARM OIL" side
(5) "ADD" mark
(6) "FULL" mark
Ensure that oil level gauge (1) is seated.
If the engine is stopped, remove oil level gauge (1). Observe the oil level on "ENGINE STOPPED WITH OIL COLD" side (3).
If the engine is operating, reduce the engine speed to low idle. Remove oil level gauge (1) and observe the oil level on "ENGINE AT LOW IDLE WITH WARM OIL" side (4). The oil level should be between "ADD" mark (5) and "FULL" mark (6).
Engine damage can occur if the crankcase is filled above the "FULL" mark on the oil level gauge (dipstick).An overfull crankcase can cause the crankshaft to dip into the oil. This will reduce the power that is developed and also force air bubbles into the oil. These bubbles (foam) can cause the following problems: reduction of the oil's ability to lubricate, reduction of oil pressure, inadequate cooling, oil blowing out of the crankcase breathers and excessive oil consumption.Excessive oil consumption will cause deposits to form on the pistons and in the combustion chamber. Deposits in the combustion chamber lead to the following problems: guttering of the valves, packing of carbon under the piston rings and wear of the cylinder liner.If the oil level is above the "FULL" mark on the oil level gauge, drain some of the oil immediately.
If necessary, remove oil filler cap (2) and add oil. For the correct oil to use, see this Operation and Maintenance Manual, "Refill Capacities and Recommendations" topic (Maintenance Section). Do not fill the crankcase above "FULL" mark (6). Clean the oil filler cap. Install the oil filler cap.
Record the amount of oil that is added. For the next oil sample and analysis, include the total amount of oil that has been added since the previous oil change. This will help to provide the most accurate oil analysis.
Caterpillar parts catalog:
Parts adapter Caterpillar catalog:
1198604
ADAPTER-TIP
988K, 992C, 992D, 992G
988K, 992C, 992D, 992G
1198605
ADAPTER-TIP
992C, 992D, 992G
992C, 992D, 992G
1140466
ADAPTER-TIP
345B II, 980G, 980G II, 986H, 988B, 988F, 988F II, 988G
345B II, 980G, 980G II, 986H, 988B, 988F, 988F II, 988G
1140465
ADAPTER-TIP
345B II, 980G, 980G II, 986H, 988B, 988F, 988F II, 988G
345B II, 980G, 980G II, 986H, 988B, 988F, 988F II, 988G
1258405
ADAPTER-TIP
980C, 980F, 980F II, 980G, 980G II
980C, 980F, 980F II, 980G, 980G II
1258404
ADAPTER
980C, 980F, 980F II, 980G, 980G II
980C, 980F, 980F II, 980G, 980G II
1258406
ADAPTER-TIP
980C, 980F, 980F II, 980G, 980G II
980C, 980F, 980F II, 980G, 980G II
1073555
ADAPTER-TIP
988F II, 988G, 990, 990 II, 990H, 992D, 992G
988F II, 988G, 990, 990 II, 990H, 992D, 992G
1073556
ADAPTER-TIP
988F II, 988G, 990, 990 II, 990H, 992D, 992G
988F II, 988G, 990, 990 II, 990H, 992D, 992G
6I9898
ADAPTER-TIP
980G, 980G II
980G, 980G II
6I8244
ADAPTER-TIP
980G, 980G II
980G, 980G II
6I8243
ADAPTER-TIP
980G, 980G II
980G, 980G II
2974929
ADAPTER AS
824H, 825H, 826H, 836H, 950H, 962G II, 962H, 966G II, 966H, 972G II, 972H, 980G II, 980H
824H, 825H, 826H, 836H, 950H, 962G II, 962H, 966G II, 966H, 972G II, 972H, 980G II, 980H
1159890
ADAPTER AS-PUMP
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 980G, 980G II, 980H
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 980G, 980G II, 980H
1857576
ADAPTER
980G II
980G II
1782754
ADAPTER
950G II
950G II
1782753
ADAPTER
950G II
950G II
1782750
ADAPTER
950G II, 980G II
950G II, 980G II
1927356
ADAPTER
966H, 966K, 966M, 966M XE, 972H, 972K, 972M, 972M XE, 980C, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M
966H, 966K, 966M, 966M XE, 972H, 972K, 972M, 972M XE, 980C, 980G, 980G II, 980H, 980K, 980K HLG, 980M, 982M
3297063
ADAPTER
980G, 980G II
980G, 980G II
2586613
ADAPTER
320D, 330D, 824H, 826H, 834H, 836H, 988H
320D, 330D, 824H, 826H, 834H, 836H, 988H
8R0752
ADAPTER
69D, 773D, 773E, 775D, 775E, 824C, 824G II, 824H, 825G II, 825H, 826G II, 826H, 834G, 834H, 836G, 836H, 844, 844H, 854K, 966D, 966F, 966F II, 970F, 980C, 980F, 980F II, 980G, 988G, 988H, 990 II, 990H,...
69D, 773D, 773E, 775D, 775E, 824C, 824G II, 824H, 825G II, 825H, 826G II, 826H, 834G, 834H, 836G, 836H, 844, 844H, 854K, 966D, 966F, 966F II, 970F, 980C, 980F, 980F II, 980G, 988G, 988H, 990 II, 990H,...
2802773
ADAPTER
988H
988H
2075970
ADAPTER
814F, 814F II, 815F II, 966G II
814F, 814F II, 815F II, 966G II