ADAPTER 1118218 - Caterpillar

TARGET="_parent">Engine Oil Level - Check
Diesel Exhaust Fluid - Fill
Grapple Head - Lubricate
Hydraulic System Oil Level - Check
Stabilizer and Cylinder Bearings - Lubricate
Swing Bearing - Lubricate
Swing Drive - Lubricate
Saw Chain - Sharpen
Saw Bar - Inspect
Pivot Pin - Lubricate
Rotator Head Bolts - Inspect
Bearing (Crosshead) - Lubricate
Bearings (Cylinder Ends) - Lubricate
Saw Chain Oil Level - Check
Rotator - Inspect/Lubricate
Rotator Head Bolts - Check
Every Week
Hoses and Clamps - Inspect/Replace
Every 50 Service Hours or Weekly
Fuel Tank Water and Sediment - Drain
Initial 250 Service Hours
Hydraulic System Oil - Change
Hydraulic System Oil Filter (Pilot) - Replace
Hydraulic System Oil Filter - Replace
Swing Drive Oil - Change
Every 250 Service Hours or Monthly
Battery - Clean
Battery Hold-Down - Tighten
Belts - Inspect/Adjust/Replace
Battery or Battery Cable - Inspect/Replace
Engine Oil and Filter - Change
Swing Drive Oil Level - Check
Initial 500 Hours (for New Systems, Refilled Systems, and Converted Systems)
Cooling System Coolant Sample (Level 2) - Obtain
Every 500 Service Hours
Fuel Filter (In-Line) - Replace
Hydraulic System Oil Filter (Case Drain) - Replace
Hydraulic System Oil Filter (Pilot) - Replace
Hydraulic System Oil Filter (Return) - Replace
Hydraulic System Oil Sample - Obtain
Cooling System Coolant Sample (Level 1) - Obtain
Engine Crankcase Breather - Clean
Fuel Tank Cap and Strainer - Clean
Hydraulic System Oil Filter - Replace
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter Number One - Replace
Fuel Tank Water and Sediment - Drain
Every 1000 Service Hours
Swing Drive Oil - Change
Fuel System Primary Filter (Water Separator) Element - Replace
Fuel System Secondary Filter Number One - Replace
Every 1000 Service Hours or 6 Months
Swing Drive Oil - Change
Every 1500 Service Hours
Engine Crankcase Breather Element - Replace
DEF Manifold Filters - Replace
Every 2000 Service Hours or 1 Year
Hydraulic System Oil - Change
Receiver Dryer (Refrigerant) - Replace
Every Year
Cooling System Coolant Sample (Level 2) - Obtain
Every 3000 Service Hours or 2 Years
Cooling System Coolant Extender (ELC) - Add
Every 4000 Service Hours
Hydraulic Tank Breaker Relief Valve - Replace
Every 6000 Service Hours or 4 Years
Cooling System Coolant (ELC) - Change
Every 8 Service Hours or Daily for Work Tools Used in Severe Applications
Rotator - Inspect/Lubricate
Every 100 Service Hours
Rotator Head Bolts - Check