ADAPTER 1192942 - Caterpillar

Illustration 1 g03334557
Front view of engine
Illustration 2 g03334558
Right side view of engine
Table 1
Specification for 312-6297 Engine Oil Lines Gp
Item Qty Part Specification Description
1 4 109-2332 O-Ring Seal Lightly, lubricate the bore with the fluid that is being sealed.
2 1 2W-1053 Plug Torque to 100 15 N m (74 11 lb ft).
3 6 0S-1571 Bolt Use the following tightening sequence in order to tighten the clamp bolts:
1. Snug the clamp assembly to the tube.
2. Tighten the clamp assembly to the elbow or adapter.
3. Then, tighten the clamp assembly to the tube.
4 1 2W-1635 Spring Length under test force is 102.0 mm (4.02 inch).
Test force is 518 26 N (116 6 lb).
Free length after test is 143.4 mm (5.65 inch).
5 2 7N-7697 Plunger Cooling jet sequence valve:
Valves must start to open at a pressure difference of 130 30 kPa (19 4 psi).
Valves must be fully open at 200 30 kPa (29 4 psi).
6 2 6B-9202 Spring Length under test force is 68.27 mm (2.688 inch).
Test force is 85 to 100 N (19.0 to 22.4 lb).
Free length after test is 112.72 mm (4.438 inch).
7 6 4F-8965 Bolt Use the following tightening sequence in order to tighten the clamp bolts:
1. Snug the clamp assembly to the tube.
2. Tighten the clamp assembly to the elbow or adapter.
3. Then, tighten the clamp assembly to the tube.
8 2 237-7623 O-Ring Seal Lightly, lubricate the bore with the fluid that is being sealed.