ADAPTER 1339185 - Caterpillar

Illustration 4 g06016802
Remove bolts (7) and plate (8).
Illustration 5 g06016790
Install Tooling (B) to pin assembly (9). Attach a suitable lifting device to Tooling (B). The weight of pin assembly (9) and Tooling (B) is approximately 235 kg (518 lb).
Use Tooling (B) to retract pin assembly (9). Retract pin assembly (9) to a distance of 356 mm (14.0 inch). Remove link assembly (1) and Tooling (B).Note: Do not remove pin assembly (9) completely.
Illustration 6 g06016803
Remove lip seals (10) from link assembly (1).
Illustration 7 g06016806
Use Tooling (C) to remove bearing (11) from link assembly (1)
Illustration 8 g06016808
Insert pin assembly (9). Attach Tooling (D) and a suitable lifting device to pin assembly (9) and the machine frame.
Illustration 9 g06016810
Install suitable cribbing between cylinder assembly (12) and arm assembly (2).
Illustration 10 g06016816
Disconnect hose assembly (15). Remove bolts (13) and plate (14).
Illustration 11 g06016820
Install Tooling (B) to pin assembly (16). Attach a suitable lifting device to Tooling (B). The weight of pin assembly (16) and Tooling (B) is approximately 235 kg (518 lb).
Use Tooling (B) to retract pin assembly (16). Retract pin assembly (16) to a distance of 356 mm (14.0 inch). Remove link assembly (1) and Tooling (B).Note: Do not remove pin assembly (16) completely.
Illustration 12 g06016822
Illustration 13 g06016808
Retract cylinder assembly (12). Insert pin assembly (16). Attach a suitable lifting device to tilt lever assembly (17). The weight of tilt lever assembly (17) is approximately 1691 kg (3728 lb). Remove Tooling (D) from pin assembly (9).
Illustration 14 g06016827
Remove bolts (18) and plate (19).
Illustration 15 g06016834
Install Tooling (E) to pin assembly (20). Attach a suitable lifting device to Tooling (E). The weight of pin assembly (20) and Tooling (E) is approximately 439 kg (968 lb).
Remove pin assembly (20). Remove tilt lever assembly (17).
Illustration 16 g06016836
Remove lip seals (21).
Illustration 17 g06016839
Install Tooling (F) and a suitable lifting device onto bearing (22). The weight of Tooling (F) is approximately 272 kg (600 lb). Remove bearing (22) from tilt lever assembly (17).Installation Procedure
Install lever assembly (17) in the reverse order of removal.
Check and replace lip seals (10) and (21) if necessary. Apply Tooling (G) to bore prior to install lip seals (10) and (21).
Apply Tooling (H) to pin assemblies (9), (16), and (20).