AVSPARE.COM
parts catalog

ADAPTER- 1400027 - Caterpillar



1400027 ADAPTER- Caterpillar parts ADAPTER
Rating:
66
Alternative (cross code) number:
CA1400027
140-0027
1400027
Caterpillar 1400027 ADAPTER-
Weight: 0.35 pounds 0 kg.

Buy ADAPTER- 1400027 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

2. Put identification on the oil lines as to their location on the valve. Disconnect oil lines (3) and (6).3. Remove bolt (4). Remove circle drive lock check valve (5).Install Circle Drive Lock Check Valve
1. Put circle drive lock check valve (2) in position on the frame. Install the one bolt that holds it. The other two bolts that hold the lock check valve will be installed when the cover is installed.2. Connect oil lines (1) and (3) to their correct location on the valve. 3. Put cover (4) in position on the frame. Install the bolts that hold it.Remove Centershift Lock Check Valve
1. Remove bolts (1) that hold cover (2) to the frame. Remove cover (2).
Earlier Model Shown
Oil that is hot or under pressure can cause personal injury. To prevent personal injury, let the oil become cool before oil lines (3) and (4) are disconnected. Loosen the oil lines slowly to release any pressure in the oil lines.
2. Put identification on the oil lines as to their location on the lock check valve. Disconnect oil lines (3) and (4) from the valve.3. Remove bolt (6). Remove centershift lock check valve (5).Install Centershift Lock Check Valve
Earlier Model Shown1. Put centershift lock check valve (3) in position on the frame. Install the one bolt that holds it. The other two bolts that hold the lock check valve will be installed when the cover is installed.2. Connect oil lines (1) and (2) to their correct locations on the lock check valve. 3. Install cover (4) on the frame. Install the bolts that hold it in place.Remove Blade Sideshift Lock Check Valve (Earlier Models Only)
1. Remove bolts (1) that hold cover (2) to the frame. Remove cover (2) from over the lock check valve.
Oil that is hot or under pressure can cause personal injury. To prevent personal injury, let the oil become cool before oil lines (3) and (6) are disconnected. Loosen the oil lines slowly to release any pressure in the oil lines.
2. Put identification on the oil lines as to their location on the valve. Disconnect oil lines (3) and (6) from the lock check valve.3. Remove bolt (4). Remove blade sideshift lock check valve (5).Install Blade Sideshift Lock Check Valve (Earlier Models Only)
1. Put blade sideshift lock check valve (1) in position on the frame. Install the one bolt that holds it. The other two bolts that hold the lock check valve will be installed when the cover is installed.2. Connect oil lines (2) and (3) to their correct position on the lock check valve. 3. Put cover (4) in position on the frame. Install the bolts that hold it.Disassemble Lock Check Valve (For Articulation, Right Hand Blade Lift And Centershift)
START BY:a) remove lock check valve (for articulation, right hand blade lift and centershift) 1. Put identification on four elbows (1) for their correct installation. Remove four elbows (1). Remove the O-ring seal (2) from each elbow. 2. Remove plug (3), spring (5) and ball (6) from both


Parts adapter Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.