ADAPTER AS 1422838 - Caterpillar

Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00556372
Illustration 2 g00556374
Illustration 3 g00568970
Remove bolts (2) and the washers.
Remove bolt (7) and clamp (6) .
Disconnect fitting (5) .
Remove oil supply tube assembly (3) and the gasket.
Disconnect hose (8) from the wastegate.
Remove bolts (11) and the washers.
Remove bolts (10) and the washers.
Remove oil drain tube assembly (9), the O-ring seal, and the gasket.
Remove nuts (4) .
Remove compressor (16), housing (1), and cartridge (15) from the exhaust manifold. Remove gasket (14) .
Loosen band clamps (12) and (13). Separate compressor (16), and housing (1) from cartridge (15) .