ADAPTER AS 1504046 - Caterpillar

Illustration 1 g03417835
Table 1
Specification for 368-9791 Track Idler Gp
Item Qty Part Specification Description
1 1 9W-2146 Plug Before assembly, apply blue Loctite 243 to the bore for the plug.
Torque to 25 3 N m (221 26 lb in).
2 2 7F-8267 O-Ring Seal Lubricate the bore lightly with the lubricant that is being sealed.
3 2 360-3534 Block Apply Loctite Nickel Anti Seize to the inside diameter of the block at both ends.
4 2 320-8919 Duo-Cone Seal Gp The rubber toric seals and all the contacting surfaces must be clean and dry at assembly. Just before assembly, apply a thin layer of 6V-4876 Lubricant to the contacting surfaces of the metal seal rings. The seal rings must be assembled square. The rubber toric seal should not bulge and the rubber toric seal should not twist.
- - - Minimum end play in the axial direction is 0.27 mm (0.011 inch).
Maximum end play in the axial direction is 1.55 mm (0.061 inch).