ADAPTER GP-OIL LINE 1797001 - Caterpillar

TYPE="LEVEL" DEPTH="1" @@@-->Disassembly Procedure
Start By:
Remove the engine oil pump. Refer to Disassembly and Assembly, "Engine Oil Pump - Remove". Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior of the components should be thoroughly cleaned. Dirt will be prevented from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00905006
Illustration 2 g00905007
Illustration 3 g00905008
Personal injury can result from parts and/or covers under spring pressure.Spring force will be released when covers are removed.Be prepared to hold spring loaded covers as the bolts are loosened.
Remove bolts (2) and cover (3) from body (1).
Remove spring (4) and spool (5) from body (1).
Illustration 4 g00905011
Illustration 5 g00905012
Remove bolts (6) from cover (7).
Remove cover (7) from body (1).
Illustration 6 g00905016
Remove gasket (8) from cover (7).
Illustration 7 g00905020
Illustration 8 g00905023
Remove bolts (9) from cover (10).
Remove cover (10) from body (1).
Illustration 9 g00905024
Remove bearings (11) from cover (10).
Illustration 10 g00905027
Remove shaft (12), shaft (13), and shaft (14) from body (1).
Illustration 11 g03733479
Remove bearings (15) from body (1).