1895719 ADAPTER AS Caterpillar parts
14M, 236D, 242D, 246D, 257D, 259D, 262D, 272D, 272D XHP, 277D, 279D, 287D, 289D, 299D, 299D XHP, 304, 304.5, 422E, 428E, 432E, 434E, 442E, 444E, 554, 564, 574B, 613C II, 834H, 906H, 906H2, 907H, 907H2...
Rating:
Alternative (cross code) number:
CA1895719
189-5719
1895719
CA1895719
189-5719
1895719
BACKHOE LOADER, WHEEL TRACTOR,
Number on catalog scheme:
3
For full view, you need register
Information:
diagnostic code is recorded when the VIMS main module can not communicate with the analysis control ECM through the CAT data link.This diagnostic code results in failed VIMS operations that are related to the analysis control ECM. The VIMS operations may work intermittently.
VERIFY THE HARDWARE AND THE SOFTWARE PART NUMBERS.
Verify that the following information is correct:
The part number of the VIMS configuration software
The part number of the analysis control ECM flash software.
The part number of the VIMS main module
The part number of the analysis control ECM Note: Consult the Business Unit that produces the product for the correct part numbers of the configuration software. Expected Result: All part numbers are correct. Results:
OK - All part numbers are correct. Proceed to 2.
NOT OK - All part numbers are NOT correct. The installed VIMS main module or the analysis control ECM has the wrong part number or the incorrect configuration software is installed. Replace the incorrect VIMS main module or the analysis control ECM with a module that has the correct part number. Flash the correct configuration software. STOP.
INSPECT THE HARNESS CONNECTIONS.
Turn the disconnect switch to the OFF position.
Inspect all harness connections that are related to the CAT data link. Make sure that the connectors are clean and tight.
Check the connectors for proper mating.
Check the wires at the connector.
Check each wire for nicks or signs of abrasion in the insulation.
Check for moisture at the connector.
Check the connectors for dirty contacts or corroded contacts.
Check each pin and each socket of the machine harness connectors. Expected Result: The machine harness connectors are tight and free of corrosion. Results:
OK - The machine harness connectors are tight and free of corrosion. Proceed to 3.
NOT OK - The machine harness connectors are in need of repair. Repair the machine harness or replace the machine harness. STOP.
CHECK FOR SHORTS TO GROUND
The disconnect switch remains in the OFF position.
Disconnect the machine harness from all electronic control modules that use the CATdata link.
At the machine harness for the VIMS main module, measure the resistance between frame ground and connector contacts 6 (wire 882-PK) and 7 (wire 893-GY) of the CAT data link circuit. Expected
VERIFY THE HARDWARE AND THE SOFTWARE PART NUMBERS.
Verify that the following information is correct:
The part number of the VIMS configuration software
The part number of the analysis control ECM flash software.
The part number of the VIMS main module
The part number of the analysis control ECM Note: Consult the Business Unit that produces the product for the correct part numbers of the configuration software. Expected Result: All part numbers are correct. Results:
OK - All part numbers are correct. Proceed to 2.
NOT OK - All part numbers are NOT correct. The installed VIMS main module or the analysis control ECM has the wrong part number or the incorrect configuration software is installed. Replace the incorrect VIMS main module or the analysis control ECM with a module that has the correct part number. Flash the correct configuration software. STOP.
INSPECT THE HARNESS CONNECTIONS.
Turn the disconnect switch to the OFF position.
Inspect all harness connections that are related to the CAT data link. Make sure that the connectors are clean and tight.
Check the connectors for proper mating.
Check the wires at the connector.
Check each wire for nicks or signs of abrasion in the insulation.
Check for moisture at the connector.
Check the connectors for dirty contacts or corroded contacts.
Check each pin and each socket of the machine harness connectors. Expected Result: The machine harness connectors are tight and free of corrosion. Results:
OK - The machine harness connectors are tight and free of corrosion. Proceed to 3.
NOT OK - The machine harness connectors are in need of repair. Repair the machine harness or replace the machine harness. STOP.
CHECK FOR SHORTS TO GROUND
The disconnect switch remains in the OFF position.
Disconnect the machine harness from all electronic control modules that use the CATdata link.
At the machine harness for the VIMS main module, measure the resistance between frame ground and connector contacts 6 (wire 882-PK) and 7 (wire 893-GY) of the CAT data link circuit. Expected
Cat SIS web machinery list:
Parts adapter Caterpillar catalog:
16G, 16H NA, 245, 245B, 3116, 3406, 3406B, 3406C, 3406E, 3456, 375, 375 L, 5080, 578, 583R, 583T, 587R, 587T, 621B, 621E, 621F, 621G, 623B, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 631D, 631E, 631G, ...
120H, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H NA, 14M, 160H, 160H ES...
14M, 16M, 345C, 345C L, 345C MH, 345D, 345D L, 345D L VG, 349D, 349D L, 349E, 349E L, 349E L HVG, 349E L VG, 349F L, 621H, 621K, 623H, 623K, 623K LRC, 627H, 627K, 627K LRC, 725, 730, 730C, 966H, 972H,...
16G, 16H NA, 245, 245B, 245D, 3406, 3406E, 3408, 375, 375 L, 5080, 578, 583R, 587R, 589, 621, 621B, 621E, 621F, 621G, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 631D, 631E, 631G, 633E II, 637D, 637E, 6...
14M, 16M, 24M, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304C CR, 304D CR, 304E, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 320C, 320D FM, 320D FM RR, 517, 527, 572G, 611, 615C, 769D, 771D, 773E, 775E, 7...
140M 2, 160M 2, 225, 225D, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 2470C, 2570C, 2670C, 2864C, 517, 525C, 525D, 527, 535C, 535D, 545C, 545D, 553C, 555D, 563C, 573C, 584, 586C, 793F AC, 795F AC, ...
245, 988G, 990, 992C, 992D
972H, 972K, 973C, 973D, 980G, 980G II, 986H, 988B, 988F, 988F II, 988G, 988H
980G II, 980H, 980K, 988F II, 988G, 990, 990 II, 990H, 992C, 992D, 992G
345B II, 980G, 980G II, 986H, 988B, 988F, 988F II, 988G
345B II, 980G, 980G II, 986H, 988B, 988F, 988F II, 988G
988F II, 988G, 990, 990 II, 990H, 992D, 992G
24M, 330D L, 330D MH, 336D, 336D L, 336D2, 336D2 L, 340D L, 340D2 L, 422E, 428E, 432E, 434E, 442E, 444E, 518, 521B, 522B, 541 2, 552 2, 844K, 950, 950K, 962K, 966K, 966M, 966M XE, 972K, 972M, 972M XE,...
115, 303.5E, 303E CR, 304E, 305.5E, 305E, 320B, 325B L, 330B L, 345B L, 416E, 63, CB-214D, CB-214E, CB-544, CB-545, H140CS, IT18B, IT28B
115, 312B L, 312C, 312D, 312E, 315C, 315D L, 316E L, 318B, 318C, 318E L, 319C, 319D, 319D LN, 320B, 320C, 320E, 320E L, 320E LN, 322B LN, 322C, 323D L, 323D LN, 323D2 L, 323E L, 324D, 324D L, 324D LN,...
2729701
ADAPTER
420E, 420F, 430E, 430F, 432E, 432F, 434E, 442E, 444E, 444F, 450E, 450F
420E, 420F, 430E, 430F, 432E, 432F, 434E, 442E, 444E, 444F, 450E, 450F
2787469
ADAPTER
420E, 420F, 430E, 430F, 432E, 432F, 434E, 442E, 444E, 444F, 450E, 450F
420E, 420F, 430E, 430F, 432E, 432F, 434E, 442E, 444E, 444F, 450E, 450F
305.5D, 305.5E, 416F, 420E, 420F, 422F, 428F, 430E, 430F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, D6T, D6T LGP, D6T LGPPAT, D6T XL
2354951
ADAPTER
236B, 246C, 256C, 262C, 267B, 268B, 272C, 277C, 287C, 297C, 3044C, 906, 906H, 907H, 908, 908H, C3.4
236B, 246C, 256C, 262C, 267B, 268B, 272C, 277C, 287C, 297C, 3044C, 906, 906H, 907H, 908, 908H, C3.4
2180919
ADAPTER
216B, 226B, 232B, 236B, 242B, 246C, 247B, 252B, 256C, 257B, 262C, 267B, 268B, 272C, 277C, 279C, 287C, 289C, 297C, 299C
216B, 226B, 232B, 236B, 242B, 246C, 247B, 252B, 256C, 257B, 262C, 267B, 268B, 272C, 277C, 279C, 287C, 289C, 297C, 299C
2501439
ADAPTER AS
2864C, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 442E, 444E, 5090B, 586C
2864C, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 442E, 444E, 5090B, 586C
365C L, 385B, 385C L, 422E, 422F, 428E, 428F, 432E, 432F, 434E, 434F, 442E, 444E, 444F, 725C, 730C, 770G, 770G OEM, 772G, 772G OEM, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777G, 950H, C18,...
1170473
ADAPTER
2864C, 350, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 432E, 434E, 442E, 444E, 5080, 5090B, 586C, IT28G
2864C, 350, 375, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 432E, 434E, 442E, 444E, 5080, 5090B, 586C, IT28G
2501440
ADAPTER AS
24M, 303.5C, 303.5D, 303C CR, 304C CR, 304D CR, 305.5D, 305C CR, 305D CR, 307D, 308D, 311D LRR, 311F LRR, 312D, 312D L, 312D2, 312E, 312E L, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E L, 318D2...
24M, 303.5C, 303.5D, 303C CR, 304C CR, 304D CR, 305.5D, 305C CR, 305D CR, 307D, 308D, 311D LRR, 311F LRR, 312D, 312D L, 312D2, 312E, 312E L, 314D CR, 314D LCR, 314E CR, 314E LCR, 315D L, 316E L, 318D2...