ADAPTER AS 1899185 - Caterpillar

Control Panel
The SR4 generator set control panel is located on top of the generator set. The control panel consists of a main panel with gauges, meters, and control switches. Plug in modules are utilized to enable the user to order only the components that he requires.The left side will contain a Manual Start-Stop module or an Automatic Start-Stop module, as required by the user.The right side may be blank or contain any of the three optional modules. The optional modules are an Alarm module, a Synchronizing Lights module, or a Synchronizing Lights With Reverse Power Relay module.Main Control Panel
The Main Control Panel may or may not contain all of the components shown below. Some components are optional, and may not be required for your particular application. (1) PL; panel lights (optional).(2) PLS; panel lights switch (optional).(3) ACV; alternating current voltmeter.(4) AVS; ammeter - voltmeter phase selector switch.(5) ACA; alternating current ammeter.(6) SAS; starting aid switch (optional).(7) VAR; voltage adjust rheostat.(8) Hz; frequency meter.(9) GS; governor switch or SP; speed potentiometer (optional) (GS shown).(10) OPG; oil pressure gauge.(11) DCA; direct current ammeter (optional).(12) WTG; water temperature gauge.* Panel lights (1) are controlled by a panel lights switch (PLS) (2).* Alternating current voltmeter (ACV) (3), alternating current ammeter (ACA) (5), and frequency meter (Hz) (8) show the output of the generator. Ammeter - voltmeter phase selector switch (AVS) (4) selects which phase (T1, T2 or T3) of the generator output will be monitored on ACA (5) or ACV (3).* Starting aid switch (SAS) (6) is utilized to provide a specific amount of ether when required for starting.* Voltage level rheostat (VAR) (7) replaces the rheostat in the generator regulator assembly. * Optional governor switch (GS) or speed potentiometer (SP) (9) are used to raise or lower the engine speed when the governor is equipped with a speed adjust motor. If the engine is equipped with a 2301 or 2301A electric governor, a Speed Potentiometer is mounted in this location.* Oil pressure gauge (OPG) (10) indicates engine oil pressure.* Direct current ammeter (DCA) (11) indicates starting battery charging rate in amps.* Water temperature gauge (WTG) (12) indicates engine water temperature.Automatic Start-Stop Module
The Automatic Start-Stop Module (if equipped) is designed to automatically start and stop the engine as required. It also has the capability to shut down the engine for various malfunctions or to prevent starting for the same causes.It is located in the left side on the control panel. (1) ESPB; emergency stop push button.(2) ECS;