ADAPTER 1G6699 - Caterpillar

Illustration 1 g03463957
Table 1
Specification for 343-5995 Grapple Gp    
Item     Qty     Part     Specification Description    
1     6     174-6390 Bolt     Before assembly, apply blue Loctite 242 to the threads.
Torque to 520 70 N m (384 52 lb ft).    
2     6     8T-4140 Bolt     Before assembly, apply blue Loctite 242 to the threads.
Torque to
270 40 N m (199 30 lb ft).    
3     10     352-2619 Pin     Coat all bores for the pins with black 5P-0960 Grease Cartridge .
Assemble the pin with the lubricant bore pointing towards the housing.
Diameter of the pin is
59.951 to 59.970 mm (2.3603 to 2.3610 inch).    
4     8     8T-1160 Bolt     Torque to
60 12 N m (44 9 lb ft).    
5     12     093-1433 Lip Type Seal     Install the dust seal so that the lip faces the outside seal should be extend past boss face.
Installation depth is
5.0 0.5 mm (0.20 0.02 inch).    
6     6     364-1071 Bushing     Coat all bores for the bushings with black 5P-0960 Grease Cartridge .
Bore before assembly is
60.06 to 60.13 mm (2.365 to 2.367 inch).    
7     2     343-5998 Grapple Cylinder Gp     Before assembly, apply blue Loctite 242 to the threads.    
8     10     8T-4190 Bolt     Before assembly, apply blue Loctite 242 to the threads.
Torque to
270 40 N m (199 30 lb ft).