ADAPTER 1M0023 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 367-3534 Oil Seal Removal & installer Tool 1 Start By:
Remove the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Front Pulley- Remove and Install" for the correct procedure.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02445196
Align Tooling (A) onto crankshaft front seal (2).
Turn Tooling (A) in a counterclockwise direction and remove crankshaft front seal (2) from front cover (1). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 367-3534 Oil Seal Removal & installer Tool 1
B - Loctite 5900 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the front cover is clean and free from damage.
Illustration 2 g02445217
Illustration 3 g02445197
Apply a continuous bead of Tooling (B), approximately 3 mm (0.118 inch) in diameter, to the top of the static seal beads (3).
Correctly position a new crankshaft front seal (2) in Position (X) onto front cover (1).
Position Tooling (A) onto crankshaft front seal (2).
Use Tooling (A) in order to turn crankshaft front seal (2) in clockwise direction.
If it is necessary, to apply a torque greater than 50 N m (37 lb ft) in order to install crankshaft front seal (2). Remove crankshaft front seal (2). Inspect the crankshaft front seal and the front cover for faults or damage.
If necessary repeat Step 2 through Step 6 in order to install crankshaft front seal (2). End By:
Install the crankshaft pulley. Refer to Disassembly and Assembly, "Crankshaft Front Pulley- Remove and Install" for the correct procedure.