1P1840 ADAPTER Caterpillar parts
Rating:
Alternative (cross code) number:
CA1P1840
1P-1840
1P1840
CA1P1840
1P-1840
1P1840
Weight: 4 pounds 1 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
WVE by NTK 1P1840 A/C Compressor Clutch Connector
WVE by NTK Pigtails provide electrical connection to various sensors and actuators || When not replaced, vehicle may experience intermittent or complete loss of electrical connection and/or oxidation of terminals || Designed to meet or exceed OE specifications in form, fit and function || Global coverage for import and/or domestic applications
WVE by NTK Pigtails provide electrical connection to various sensors and actuators || When not replaced, vehicle may experience intermittent or complete loss of electrical connection and/or oxidation of terminals || Designed to meet or exceed OE specifications in form, fit and function || Global coverage for import and/or domestic applications
WVE by NTK 1P1840 A/C Compressor Clutch Connector
WVE by NTK Pigtails provide electrical connection to various sensors and actuators || When not replaced, vehicle may experience intermittent or complete loss of electrical connection and/or oxidation of terminals || Designed to meet or exceed OE specifications in form, fit and function || Global coverage for import and/or domestic applications
WVE by NTK Pigtails provide electrical connection to various sensors and actuators || When not replaced, vehicle may experience intermittent or complete loss of electrical connection and/or oxidation of terminals || Designed to meet or exceed OE specifications in form, fit and function || Global coverage for import and/or domestic applications
WVE by NTK 1P1840 A/C Compressor Clutch Connector
WVE by NTK Pigtails provide electrical connection to various sensors and actuators || When not replaced, vehicle may experience intermittent or complete loss of electrical connection and/or oxidation of terminals || Designed to meet or exceed OE specifications in form, fit and function || Global coverage for import and/or domestic applications
WVE by NTK Pigtails provide electrical connection to various sensors and actuators || When not replaced, vehicle may experience intermittent or complete loss of electrical connection and/or oxidation of terminals || Designed to meet or exceed OE specifications in form, fit and function || Global coverage for import and/or domestic applications
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the V-Belts. Refer to Disassembly and Assembly, "V-Belts - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01255707
Use a suitable tool in order to prevent the crankshaft from rotating. Remove bolts (1).
Remove thrust block (2).
Carefully remove crankshaft pulley (3) from the crankshaft. Installation Procedure
Illustration 2 g01255707
Illustration 3 g01471632
Ensure that the crankshaft pulley and the thrust block are clean and free from damage. Replace any components that are damaged.
Ensure that the front of the crankshaft is clean and free from damage. Install crankshaft pulley (3) to the crankshaft.
Align the holes in the thrust block with the holes in the crankshaft. Note: Ensure that chamfered Holes (X) in the thrust block face toward the front of the engine.
Install thrust block (2) to the crankshaft pulley.
Install bolts (1) to thrust block (2).
Use a suitable tool in order to prevent the crankshaft from rotating. Tighten the bolts to a torque of 115 N m (85 lb ft).
Repeat Step 6 in order to ensure correct torque. End By:
Install the V-Belts. Refer to Disassembly and Assembly, "V-Belts - Remove and Install".
Start By:
Remove the V-Belts. Refer to Disassembly and Assembly, "V-Belts - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01255707
Use a suitable tool in order to prevent the crankshaft from rotating. Remove bolts (1).
Remove thrust block (2).
Carefully remove crankshaft pulley (3) from the crankshaft. Installation Procedure
Illustration 2 g01255707
Illustration 3 g01471632
Ensure that the crankshaft pulley and the thrust block are clean and free from damage. Replace any components that are damaged.
Ensure that the front of the crankshaft is clean and free from damage. Install crankshaft pulley (3) to the crankshaft.
Align the holes in the thrust block with the holes in the crankshaft. Note: Ensure that chamfered Holes (X) in the thrust block face toward the front of the engine.
Install thrust block (2) to the crankshaft pulley.
Install bolts (1) to thrust block (2).
Use a suitable tool in order to prevent the crankshaft from rotating. Tighten the bolts to a torque of 115 N m (85 lb ft).
Repeat Step 6 in order to ensure correct torque. End By:
Install the V-Belts. Refer to Disassembly and Assembly, "V-Belts - Remove and Install".
Parts adapter Caterpillar catalog:
Caterpillar
1P1838
ADAPTER
Caterpillar
Caterpillar
Caterpillar
Caterpillar
Caterpillar
1P1834
ADAPTER
Caterpillar
Caterpillar
1P2382
ADAPTER-TORQ
Caterpillar
Caterpillar
1P2364
ADAPTER-LINE
Caterpillar
Caterpillar
1P1844
ADAPTER
Caterpillar
Caterpillar
1P1843
ADAPTER
Caterpillar
Caterpillar
1P1842
ADAPTER
Caterpillar
Caterpillar
1P1841
ADAPTER
Caterpillar
Caterpillar