ADAPTER 1P5583 - Caterpillar

Compact Instrument Cluster
Illustration 1 g01309233
Compact Instrument ClusterDiagnostic codes can be displayed on the operator monitor. The codes can be viewed when the monitor is in the service mode. Press and hold both the Mode Switch and the Scroll Switch for 3 seconds in order to toggle between operator modes and service modes. Use the Mode Switch to move to different modes. Service Mode 0 lists diagnostic codes and event codes. Use the Scroll Switch to scroll through different submodes or screens for each mode.
Diagnostic Code Indicator - The symbol indicates that diagnostic codes are active on the machine or the service mode has been entered.
Illustration 2 g01309276
Service Mode 0 - Active Diagnostic
Illustration 3 g01309289
Service Mode 0 - Logged EventMessenger Display
Note: Not Installed on PL61Perform the following steps in order to determine diagnostic codes:
Illustration 4 g01313861
Messenger Home Page
Press the "OK" button in order to view the main menu.
Illustration 5 g01316138
Messenger Main Menu
At the main menu page, scroll to the "Service" menu option and press the "OK" button.
Illustration 6 g01316139
Messenger Service Menu
At the service menu page, the first option in the service menu will be "Diagnostics/Events". Press "OK" in order to view the list of Active codes and Logged codes.
Illustration 7 g01316146
Messenger Diagnostics/Events list page
The Diagnostics/Events list page will show the following: MID, CID-FMI or EID-WCI, the number of code occurrences and if the code is currently active or not. Pressing "OK" on any of these codes will display the Diagnostic/Event detail screen.Note: If the code is Active, there will be an "A" in the "ACT" column.
Illustration 8 g01316150
Messenger Diagnostic/Event Detail ScreenThe detail screen will display the following: source ECM, CID-FMI or EID-WCI, a description of the failed component and the failure type.