ADAPTER AS 1T1404 - Caterpillar

The drain valve is located at the right side rear of the scraper. 1. Open the drain valve and allow the water and sediment to drain into a suitable container.2. Close the drain valve.Air Reservoirs
Drain Moisture and Sediment
The two tractor air reservoirs are located under the left front of the machine. The scraper air reservoir is located under the right rear of the machine.Open the drain valves. Allow all condensation to drain into a container. Close the drain valves.Walk-Around Inspection
Inspect Machine
Accumulated grease and oil on a machine is a fire hazard. Remove this debris with steam cleaning or high pressure water, at least every 1000 hours or each time any significant quantity of oil is spilled on a machine.
Keep a close watch for leaks. If leaking is observed, find the source and correct the leak. Check the fluid levels more frequently than the recommended periods if leaking is suspected or observed. 1. Inspect the engine precleaner for dirt and debris build-up. Remove dirt and debris from precleaner screen. Make sure the air filter indicator piston is not in the red zone. 2. Inspect the hitch components for cracks, worn pins or damaged stops. 3. Inspect the steering linkage for cracks and worn or damaged components. 4. Inspect draft frame gooseneck and cross tube for cracks, damage or distortion. 5. Inspect the draft arms for loose or missing mounting bolts. 6. Inspect the bowl and ejector for damage or distortion. 7. Inspect the lights for broken bulbs and lenses. Replace if broken. 8. Inspect and remove any trash build-up in the engine compartment.9. Inspect the cooling system for leaks, faulty hoses and trash build-up. Correct any leaks and remove any trash from radiator. 10. Inspect the hydraulic system for leaks. Inspect the tank, hoses, tubes, plugs, joints and fittings. Correct any leaks. 11. Inspect differential, under the machine, for leaks. 12. Inspect final drives for leaks. 13. Inspect transmission for leaks. 14. Inspect tires (front and rear) for damage and proper inflation. Replace any missing valve caps. 15. Inspect the brake actuator and wheel brakes for leaks. 16. Be sure the covers and guards are firmly in place. Inspect for damage. 17. Inspect the steps, walkways and handholds for their condition and cleanliness. Inspect the Rollover Protective Structure (ROPS) for damage. If repair is necessary contact your Caterpillar dealer. Tighten any loose ROPS bolts. 18. Inspect the operator's compartment for cleanliness. Keep it clean.19. Inspect the instrument panel for broken gauges and indicator lights. Replace if broken.20. Adjust the rear view mirrors for best vision.Cleaning Windows
Use commercially available window cleaning solutions to clean the windows.Lift the latch to slide the window open.Water Separator
Drain the Water and Sediment
Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.Turn the disconnect switch OFF or disconnect the battery when changing fuel filters or water separator elements. Drain the fuel from the water separator into a suitable container before removing the water separator element.
The water separator is not a filter.