1W1807 ADAPTER-FAN Caterpillar parts
814B, 950B, 950B/950E, TK1051
Rating:
Alternative (cross code) number:
CA1W1807
1W-1807
1W1807
CA1W1807
1W-1807
1W1807
Weight: 17 pounds 7 kg.
TRACK FELLER BUNCHER, WHEEL LOADER,
Compatible equipment models: 1W1807:
Number on catalog scheme:
1
For full view, you need register
Information:
Under Water Leak Test Procedure.
Follow steps 1.a to 1.i in order to test the coolant side of the exhaust gas cooler (NRS).
Plug the coolant inlet of the exhaust gas cooler (NRS).
Plug the coolant outlet port with tube and pressure regulator assembly.
Make sure that the air pressure regulator is closed and connect compressed air to the pressure regulator.
Use a suitable air supply in order to apply an air pressure of 250 kPa (36 psi) to the exhaust gas cooler (NRS).
While the exhaust gas cooler (NRS) is still pressurized, submerge the cooler in water that is at ambient temperature.
Allow the exhaust gas cooler (NRS) to settle in order for the air that is trapped to escape.
Observe the exhaust gas cooler (NRS) for air bubbles that indicate a leak. If air bubbles are seen within 3 minutes, this indicates a leak with the exhaust gas cooler (NRS). Note the location or the origin of the leak. Record this information.
If no bubbles are detected after 3 minutes, the exhaust gas cooler (NRS) is reusable.
Remove the exhaust gas cooler (NRS) from the water. If the exhaust gas cooler (NRS) does not leak, the problem may be elsewhere in the cooling system or the engine. Refer the service manual in order to check for leakage. If the exhaust gas cooler (NRS) does leak, the exhaust gas cooler (NRS) should be replaced.
Follow steps 2.a to 2.i in order to test the gas side of the exhaust gas cooler (NRS).
Plug the gas inlet of the exhaust gas cooler (NRS).
Plug the gas outlet port with tube and pressure regulator assembly.
Make sure that the air pressure regulator is closed and connect compressed air to the pressure regulator.
Use a suitable air supply in order to apply an air pressure of 250 kPa (36 psi) to the exhaust gas cooler (NRS).
While the exhaust gas cooler (NRS) is still pressurized, submerge the cooler in water that is at ambient temperature.
Allow the exhaust gas cooler (NRS) to settle in order for the air that is trapped to escape.
Observe the exhaust gas cooler (NRS) for air bubbles that indicate a leak. If air bubbles are seen within 3 minutes, this indicates a leak with the exhaust gas cooler (NRS). Note the location or the origin of the leak. Record this information.
If no bubbles are detected after 3 minutes, the exhaust gas cooler (NRS) is reusable.
Remove the exhaust gas cooler (NRS) from the water. If the exhaust gas cooler (NRS) does not leak, the problem may be elsewhere in the cooling system or the engine. Refer the service manual in order to check for leakage. If the exhaust gas cooler (NRS) does leak, the exhaust gas cooler (NRS) should be replaced.
Follow steps 1.a to 1.i in order to test the coolant side of the exhaust gas cooler (NRS).
Plug the coolant inlet of the exhaust gas cooler (NRS).
Plug the coolant outlet port with tube and pressure regulator assembly.
Make sure that the air pressure regulator is closed and connect compressed air to the pressure regulator.
Use a suitable air supply in order to apply an air pressure of 250 kPa (36 psi) to the exhaust gas cooler (NRS).
While the exhaust gas cooler (NRS) is still pressurized, submerge the cooler in water that is at ambient temperature.
Allow the exhaust gas cooler (NRS) to settle in order for the air that is trapped to escape.
Observe the exhaust gas cooler (NRS) for air bubbles that indicate a leak. If air bubbles are seen within 3 minutes, this indicates a leak with the exhaust gas cooler (NRS). Note the location or the origin of the leak. Record this information.
If no bubbles are detected after 3 minutes, the exhaust gas cooler (NRS) is reusable.
Remove the exhaust gas cooler (NRS) from the water. If the exhaust gas cooler (NRS) does not leak, the problem may be elsewhere in the cooling system or the engine. Refer the service manual in order to check for leakage. If the exhaust gas cooler (NRS) does leak, the exhaust gas cooler (NRS) should be replaced.
Follow steps 2.a to 2.i in order to test the gas side of the exhaust gas cooler (NRS).
Plug the gas inlet of the exhaust gas cooler (NRS).
Plug the gas outlet port with tube and pressure regulator assembly.
Make sure that the air pressure regulator is closed and connect compressed air to the pressure regulator.
Use a suitable air supply in order to apply an air pressure of 250 kPa (36 psi) to the exhaust gas cooler (NRS).
While the exhaust gas cooler (NRS) is still pressurized, submerge the cooler in water that is at ambient temperature.
Allow the exhaust gas cooler (NRS) to settle in order for the air that is trapped to escape.
Observe the exhaust gas cooler (NRS) for air bubbles that indicate a leak. If air bubbles are seen within 3 minutes, this indicates a leak with the exhaust gas cooler (NRS). Note the location or the origin of the leak. Record this information.
If no bubbles are detected after 3 minutes, the exhaust gas cooler (NRS) is reusable.
Remove the exhaust gas cooler (NRS) from the water. If the exhaust gas cooler (NRS) does not leak, the problem may be elsewhere in the cooling system or the engine. Refer the service manual in order to check for leakage. If the exhaust gas cooler (NRS) does leak, the exhaust gas cooler (NRS) should be replaced.
Caterpillar parts catalog:
Parts adapter Caterpillar catalog:
213B, 214B, 224B, 950B, 950B/950E, 950F, 950F II, 950G, 950G II, 950H, 960F, 962G, 962G II, 962H, 966C, 966D, 966F, 966F II, 973, 973C, 980C, 980F
527, 814B, 815B, 966D, 966F, D5H, D5H XL, D5HTSK II
950, 950B, 950B/950E, 950F, 950F II, 953B, 953C, 955L, 960F, 963, 963B, 963C, 966F II
950, 950B, 950B/950E, 950F, 950F II, 953B, 953C, 955L, 960F, 963, 963B, 963C, 966F II
938G II, 950B, 950B/950E, 950F, 950F II, 950G, 950G II, 950H, 955L, 960F, 962G, 962G II, 962H, 963, 963B, 963C, 966F II, 966G, 966H, 972G, 972H
950B, 950B/950E, 950F, 950F II, 950G, 950G II, 950H, 960F, 962G, 962G II, 962H, 966C, 966D, 966F, 966F II, 973, 973C, 980C, 980F
950B, 950B/950E, 950F, 950F II, 950G, 950G II, 950H, 960F, 962G, 962G II, 962H, 966C, 966D, 966F, 966F II, 973, 973C, 980C, 980F
525, 613G, 814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 938G II, 938H, 950F II, 950G, 950G II, 950H, 962G, 962G II, 962H, 966F, 966F II, 966G, 966G II, 966H, 970F, 972G, 972G II, 972H, D6M...
518C, 528, 528B, 530B, 814, 815, 816, 950B, 950B/950E, 950F, 950F II, 955K, 955L, 960F
814B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 966D, 966F, 966F II, 970F, 972G
814B, 815B, 966D, 966F, 966F II, 972G
530B, 814F, 814F II, 815F, 815F II, 816F, 816F II, 950B, 950B/950E, 950F, 950F II, 950G, 960F, 962G, 966D, 966F, 966F II, 970F, R1300, R1300G, R1300G II, R1600, R1600G, R1600H
7V7505
ADAPTER
966R
966R
6N5464
ADAPTER
988B
988B
7N0724
ADAPTER
980C
980C
9F6456
ADAPTER
826C, 980C
826C, 980C
7V9124
ADAPTER
966C, 966R
966C, 966R
7V9128
ADAPTER
966C, 966R
966C, 966R
2Y9595
ADAPTER
966C
966C
3T5564
ADAPTER
966R
966R