ADAPTER AS-FUEL VALVE 1W7885 - Caterpillar

Drain the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change" for the correct draining and filling procedures.
Illustration 1 g03663531
Remove bolts (1) and the washers. Remove bearing assembly (2).
Illustration 2 g03663566
Attach Tooling (B) and a suitable lifting device to support assembly (6). The weight of support assembly (6) is approximately 141 kg (310 lb).
Remove bolts (3), bolts (4), and bolts (6), and the washers. Use Tooling (B) and the suitable lifting device in order to remove support assembly (6).
Illustration 3 g03663583
Remove panel (7).
Illustration 4 g03664130
Loosen clamp (11). Disconnect hose (12) from hydraulic tank (13).
Remove bolts (8) and bolts (9). Remove panel (10).
Illustration 5 g03664146
Disconnect hose assemblies (14).
Illustration 6 g03664185
Remove panel (15).
Illustration 7 g03664213
Disconnect hose assembly (16) from the back of hydraulic tank (13).
Disconnect hoses (17).
Cut all cable straps (18) that secure the harness assembly to hydraulic tank (13).
Illustration 8 g03664219
Disconnect harness assembly (19) from the back of the hydraulic tank.
Illustration 9 g03664220
Remove bolts (20). Set engine electronic control module (21) to the side.
Illustration 10 g03664226
Disconnect tube assembly (25).
Remove bolt (22) and clamps (24). Set breather assembly (24) out of the way.
Disconnect hose assembly (23), hose assemblies (27), and hose assembly (28).
Illustration 11 g03664266
Remove clamps (29).
Illustration 12 g03664285
Disconnect hose assemblies (30) from the bottom of hydraulic tank (13).
Illustration 13 g03664288
Illustration 14 g03664291
Attach Tooling (A) and a suitable lifting device to hydraulic tank (13). The weight of hydraulic tank (13) is approximately 185 kg (410 lb).
Remove bolts (31) and bracket assembly (32). Repeat this step for the opposite side.
Use Tooling (A) and the suitable lifting device in order to remove hydraulic tank (13). Installation Procedure
Install hydraulic tank (13) in the reverse order of removal.