2013977 ADAPTER Caterpillar parts
M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH, M325C MH
Rating:
Alternative (cross code) number:
CA2013977
201-3977
2013977
CA2013977
201-3977
2013977
Weight: 0.49 pounds 0 kg.
WHEELED EXCAVATOR,
Cross Reference:
ATLAS COPCO
163 9592,
AUWÄRTER
1905.545.20,
BOMAG
055 712 44,
CATERPILLAR
201-3977,
HELLA
561 006-012,
9BP 561 006-015,
KNAUS
011208,
LIEBHERR
7 790 283 14,
MAN
81.63731.0232,
MERCEDES-BENZ
000 810 06 11,
A 000 810 06 11,
NEOPLAN
1905.545.20,
O & K
2168755,
Compatible equipment models: 2013977:
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1 Start By:
Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Illustration 1 g01137560
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tooling (A) to compress valve springs (3). Remove retainer locks (1).
Remove Tooling (A). Remove spring retainer (2) and valve springs (3).
Remove valve stem seal (4), spring seat washer (5), and valves (6). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01137560
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Lubricate valves (6) with clean engine oil. Install valves (6) in the cylinder head assembly. Install new valve stem seal (4) against the valve guide.
Install spring seat washer (5), valve springs (3), and spring retainer (2).
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Note: A small amount of grease can be used to hold the valve keepers in position during installation.
Use Tooling (A) to compress valve springs (3). Install retainer locks (1). End By:
Install the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1 Start By:
Remove the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Illustration 1 g01137560
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Use Tooling (A) to compress valve springs (3). Remove retainer locks (1).
Remove Tooling (A). Remove spring retainer (2) and valve springs (3).
Remove valve stem seal (4), spring seat washer (5), and valves (6). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 5S-1330 Valve Spring Compressor 1
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01137560
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Lubricate valves (6) with clean engine oil. Install valves (6) in the cylinder head assembly. Install new valve stem seal (4) against the valve guide.
Install spring seat washer (5), valve springs (3), and spring retainer (2).
The valve spring keepers can be thrown from the valve when the valve spring compressor is released. Ensure that the valve spring keepers are properly installed on the valve stem. To help prevent personal injury, keep away from the front of the valve spring keepers and valve springs during the installation of the valves.
Note: A small amount of grease can be used to hold the valve keepers in position during installation.
Use Tooling (A) to compress valve springs (3). Install retainer locks (1). End By:
Install the cylinder head. Refer to Disassembly and Assembly, "Cylinder Head - Install".
Cat SIS web machinery list:
Parts adapter Caterpillar catalog:
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H NA, 12K, 12M, 135H, 135H NA, 140G, 140H, 140H NA, 140K, 140K 2, 140M, 143H, 14H, 160H, 160K, 163H, 16H, 16M, 215D, 225, 225D, 229, 229D, 231D, 235,...
215B, 225, 235, 235B, 235C, 235D, 245B, 245D, 24H, 30/30, 3126, 3126B, 3126E, 320D, 320D FM, 325C FM, 3304B, 3306, 3306B, 3306C, 330C FM, 3406, 3406B, 3406C, 3406E, 3408, 3408C, 3412, 3456, 35, 3512, ...
120H, 120K, 120K 2, 12H, 12K, 12M, 135H, 140G, 140H, 140K, 140K 2, 140M, 140M 2, 143H, 14H, 14M, 160H, 160K, 160M, 160M 2, 163H, 16H, 16M, 2290, 2390, 2391, 2491, 24H, 24M, 2590, 30/30, 3114, 3116, 31...
10-20B, 120G, 12G, 12H, 12H ES, 12H NA, 130G, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 235, 245, 24M, 311D LRR, 311F LRR, 320 L, 3208, 320B FM LL, 320C F...
120H, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H NA, 14M, 160H, 160H ES...
307C, 308C, 311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, ...
311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D LCR, 314E CR, 314E LCR, 315, 315B, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318...
315B, 315B FM L, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 319C, 320, 320 L, 320B, 320B L, 320B U, 320C, 320C L, 320D, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E...
318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 321C, 321D LCR, 322C, 322C FM, 323D L, 323D LN, 323D SA, 323D2 L, 3...
2173813
ADAPTER AS
M313C, M315C, M316C, M318C, M318C MH, M322C, M325C MH
M313C, M315C, M316C, M318C, M318C MH, M322C, M325C MH
2173812
ADAPTER AS
M313C, M315C, M316C, M318C, M318C MH, M322C, M325C MH
M313C, M315C, M316C, M318C, M318C MH, M322C, M325C MH
2162172
ADAPTER AS
M313C, M315C, M316C, M318C, M318C MH, M322C, M325C MH
M313C, M315C, M316C, M318C, M318C MH, M322C, M325C MH
2195628
ADAPTER AS
M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH
M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH
5W5842
ADAPTER-SOLENOID
205, 205B, 206, 206B, 211B, 212, 212B, 213B, 214B, 224B, M313C, M315C, M316C, M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH
205, 205B, 206, 206B, 211B, 212, 212B, 213B, 214B, 224B, M313C, M315C, M316C, M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH
8U0241
ADAPTER-HOSE
205B, 206B, 211B, 212B, 214B, 224B, M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH
205B, 206B, 211B, 212B, 214B, 224B, M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318C, M318C MH, M318D, M318D MH, M322C, M322D, M322D MH
2056657
ADAPTER
311C
311C
1968070
ADAPTER
311C, 314C
311C, 314C
303, 304, 305, 305.5, 305.5E, 306, 306E, 986H
1195260
ADAPTER
312C, 315C, 318C, 319C, 320C, 320C FM, 320D, 320D L, 320D LRR, 320D RR, 321C, 321D LCR, 322C, 323D L, 323D LN, 323D SA, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 328D LCR, 329D, 329D L, 329D LN, 330C...
312C, 315C, 318C, 319C, 320C, 320C FM, 320D, 320D L, 320D LRR, 320D RR, 321C, 321D LCR, 322C, 323D L, 323D LN, 323D SA, 324D, 324D L, 324D LN, 325C, 325D, 325D L, 328D LCR, 329D, 329D L, 329D LN, 330C...
2609149
ADAPTER AS
312C, 315C, 318C, 319C, 349E, 349E L HVG, 349F L, 525C, 535C, 545C, 815B, D10T2
312C, 315C, 318C, 319C, 349E, 349E L HVG, 349F L, 525C, 535C, 545C, 815B, D10T2
2249213
ADAPTER AS
M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2
M313C, M313D, M315C, M315D, M315D 2, M316C, M316D, M317D 2