ADAPTER-TIP 2297098 - Caterpillar

PARTS NEEDED
Qty
Part Number Description
1 2434615 Harness A.ACTION REQUIRED
See the attached Rework Procedure.OWNER NOTIFICATION
U.S. and Canadian owners will receive the attachedOwner Notification.SERVICE CLAIM ALLOWANCES
Caterpillar Dealer Suggested Customer Suggested
Parts Labor Hrs. Parts Labor Hrs. Parts Labor Hrs.
100% 1.0 0 0 0 0
This is a 1.0- hour job. U.S. and Canadian Dealers Only - Eligibledealers may enter a Type 2 SIMS ReportPARTS DISPOSITION
Handle the parts in accordance with your WarrantyBulletin on warranty parts handling.MAKE EVERY EFFORT TO COMPLETE THIS PROGRAMAS SOON AS POSSIBLE.Attach. (1-Owner Notification)
(2-Rework Procedure)COPY OF OWNER NOTIFICATION FOR U.S. AND CANADIAN OWNERS
XYZ Corporation
3240 Arrow Drive
Anywhere, YZ 99999PRIORITY - PRODUCT IMPROVEMENT PROGRAM FORADDING A WIRING HARNESS TO THE AUXILIARY TEMPERATURE CIRCUITMODELS INVOLVED - CERTAIN 3126B, C-10, ANDC-12 INDUSTRIAL ENGINESDear Caterpillar Product Owner:A wiring harness needs to be added to the auxiliarytemperature circuit on the products listed below. A diagnostic fault willdisplay on the EMS panel for the auxiliary temperature sensor and the readingwill not update. You will not be charged for the service performed.Contact your local Caterpillar dealer immediatelyto schedule this service. The dealer will advise you of the time requiredto complete this service. Please refer the dealer to their Service Letterdated October 15, 2003 when scheduling this service.We regret the inconvenience this may causeyou, but urge you to have this service performed as soon as possible toprevent unscheduled downtime.Caterpillar Inc.
Identification #(s)Attached to October 15, 2003 Service LetterRework Procedure Dealers will need to remove any temporaryrepair (adding diode to wiring harness) before performing this ServiceLetter.
Add 2434615 Wire Harness "T" to auxiliary temperaturecircuit at the P142/J142 connection. See figure 1.
Figure 1
Flash the engine ECM with the appropriate industrialflash file noted below.
Engine Software Flash Files
3126B Industrial Test
175 HP/2500rpm & 501ft-lbs/1500rpm 0K28540K2566200 HP/2500rpm & 573ft-lbs/1500rpm 0K28560K2567244-2214-00
2379320 00 3126B HEUI Industrial 175,200/2500Interlock= 19Replaces 2344862-00Date Code 20JUN03Flash Protocol CDL3126B Industrial Test
250 HP/2100rpm & 860ft-lbs/1350rpm 0K28570K5124241-5823-00
2415823 00 3126B HEUI Industrial 250/2100Interlock= 22 Date Code 19JUN03Replaces 2377717-00 and 2344865-00 (See Note) When replacing flashfile 2344865, CatET will warn you that Interlock Codes do not match. Factory passwords arenot required to resolve the Interlock mismatch. Solution: After the flash process hascompleted, Disconnect ET, turn the ECM key switch OFF then back ON. Afterthe ECM power cycles, the interlock mismatch will be resolved automatically.C10 Industrial Test
310 HP/2100rpm & 1000ft-lbs/1500rpm 0K2586335 HP/2100rpm & 1075ft-lbs/1500rpm 0K25870K3030239-6847-00
2396847 00C10 MEUI Industrial 310,335/2100Interlock= 10Replaces 229-0413-00Date Code 25JUN03Flash Protocol CDLC10 Industrial Test
365 HP/2100rpm & 1165ft-lbs/1400rpm 0K2588390 HP/2100rpm & 1250ft-lbs/1400rpm 0K2590425 HP/2100rpm & 1325ft-lbs/1400rpm 0K2593239-6848-00
2396848 00C10 MEUI Industrial 365,390,425/2100Interlock= 11Replaces 229-0414-00Date Code 25JUN03Flash Protocol CDLC12 Industrial
425 HP/2100rpm & 1350ft-lbs/1400rpm 0K2596455 HP/2100rpm & 1450ft-lbs/1400rpm 0K25980K3032500 HP/2100rpm & 1575ft-lbs/1400rpm 0K2599239-6849-00
2396849 00 C12 MEUI Industrial 425,455,500/2100Interlock= 19Replaces 229-0420-00Date Code 04JUN03Flash Protocol CDL