2322105 ADAPTER-TIP Caterpillar parts
320C, 320D, 320D L, 320D LRR, 320D RR, 322C, 323D L, 323D LN, 323D2 L, 324D, 324D L, 324D LN, 324E L, 324E LN, 325B L, 325C, 325D L, 329D, 329D L, 329E, 329E L, 329E LN, 330C L, 330D L, 336D, 336D L, ...
Rating:
Alternative (cross code) number:
CA2322105
232-2105
2322105
CA2322105
232-2105
2322105
Weight: 34 pounds 15 kg.
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 2322105:
Number on catalog scheme:
1B
For full view, you need register
Information:
Removal Procedure for Non-Dual Tapered Roller Bearing HEUI Pump
Table 1
Required Tools
Tool Part Number Part Description Qty
A 192-5092 Removal Tool 1 Start By:
Remove the air compressor.
Remove the fuel filter base, if necessary.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03601539
Non-Dual Taper Roller Bearing HEUI pump
Illustration 2 g03601540
Dual Taper Roller Bearing HEUI pump
Note: Refer to Illustrations 1 and 2 in order to identify each unit injection hydraulic pump.
Illustration 3 g01262910
Use Tooling (A) in order to disconnect hose assembly (3).
Disconnect tube assembly (4).
Disconnect hose assemblies (5), and (6).
Disconnect harness assembly (2) from unit injector hydraulic pump (1).
Illustration 4 g01263139
Support unit injector hydraulic pump (1) by hand and remove bolts (7) and the washers. Remove unit injector hydraulic pump (1).
Illustration 5 g03590742
Remove O-ring seal (8). Removal Procedure for Dual Tapered Roller Bearing HEUI Pump
Table 2
Required Tools
Tool Part Number Part Description Qty
A 192-5092 Removal Tool 1 Start By:
Remove the air compressor.
Remove fuel filter base, if necessary.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 6 g03601539
Non-Dual Taper Roller Bearing HEUI pump
Illustration 7
Table 1
Required Tools
Tool Part Number Part Description Qty
A 192-5092 Removal Tool 1 Start By:
Remove the air compressor.
Remove the fuel filter base, if necessary.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g03601539
Non-Dual Taper Roller Bearing HEUI pump
Illustration 2 g03601540
Dual Taper Roller Bearing HEUI pump
Note: Refer to Illustrations 1 and 2 in order to identify each unit injection hydraulic pump.
Illustration 3 g01262910
Use Tooling (A) in order to disconnect hose assembly (3).
Disconnect tube assembly (4).
Disconnect hose assemblies (5), and (6).
Disconnect harness assembly (2) from unit injector hydraulic pump (1).
Illustration 4 g01263139
Support unit injector hydraulic pump (1) by hand and remove bolts (7) and the washers. Remove unit injector hydraulic pump (1).
Illustration 5 g03590742
Remove O-ring seal (8). Removal Procedure for Dual Tapered Roller Bearing HEUI Pump
Table 2
Required Tools
Tool Part Number Part Description Qty
A 192-5092 Removal Tool 1 Start By:
Remove the air compressor.
Remove fuel filter base, if necessary.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 6 g03601539
Non-Dual Taper Roller Bearing HEUI pump
Illustration 7
Cat SIS web machinery list:
Parts adapter Caterpillar catalog:
315B, 315B FM L, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 319C, 320, 320 L, 320B, 320B U, 320C, 320C L, 320D, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E LN, 321B, 321...
318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 321C, 321D LCR, 322C, 322C FM, 323D L, 323D LN, 323D SA, 323D2 L, 3...
235D, 324D, 324D L, 329D L, 330, 330 FM L, 330 L, 330B L, 330C, 330C L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345B L, 345C, 345D, 345D L, 349D, 349D L, 349E, 349E L, 350, 365B, 365B II, 365B L, 365C,...
235D, 324D, 324D L, 329D L, 330, 330 FM L, 330 L, 330B L, 330C, 330C L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345B L, 345C, 345D, 345D L, 349D, 349D L, 349E, 349E L, 350, 365B, 365B II, 365B L, 365C,...
235D, 324D, 324D L, 329D L, 330, 330 FM L, 330 L, 330B L, 330C, 330C L, 336D, 336D2, 340D L, 340D2 L, 345B II, 345B L, 345C, 345D, 345D L, 349D, 349D L, 349E, 349E L, 350, 365B, 365B II, 365B L, 365C,...
231D, 320 L, 320B, 320C, 320D, 320D GC, 320D L, 320D LRR, 320D2, 321C, 322, 322 FM L, 322 LN, 322B L, 322B LN, 322C, 323D L, 323D2 L, 324D, 324D L, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325...
231D, 320 L, 320B, 320C, 320D, 320D GC, 320D L, 320D LRR, 320D2, 321C, 322, 322 FM L, 322 LN, 322B L, 322B LN, 322C, 323D L, 323D2 L, 324D, 324D L, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325...
231D, 320 L, 320B, 320C, 320D, 320D GC, 320D L, 320D LRR, 320D2, 321C, 322, 322 FM L, 322 LN, 322B L, 322B LN, 322C, 323D L, 323D2 L, 324D, 324D L, 324E, 324E L, 324E LN, 325, 325 L, 325 LN, 325B, 325...
322 LN, 322B L, 322B LN, 322C, 325, 325 L, 325 LN, 325B L, 325C, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C L, 345B II, 345B L, 350
322 LN, 322B L, 322B LN, 322C, 325, 325 L, 325 LN, 325B L, 325C, 330, 330 FM L, 330 L, 330B, 330B L, 330C, 330C L, 345B II, 345B L, 350
322B L, 322C, 324D, 324D L, 324D LN, 324E L, 324E LN, 325B L, 325C, 325D, 325D L, 328D LCR, 329D, 329D L, 329D LN, 329E L, 329E LN, 330, 330B L, 330C L, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, ...
320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 321D LCR, 323D L, 323D LN, 323D SA
320C, 325B L, 325D L, 330C, 345B II, 63, CR20, CTV20, CTV40, CWAC-40, GSH15-60, GSH22B, GSH9, MP15, P16, P215, P360, S305, VHC-30, VHP-30, VHS-50, VT30, VT50
320C, 325B L, 325D L, 330C, 345B II, HA771, HA871, MH3059, MP15, P215, P360, S305, S365B, S465, TK371, TK381, VHC-30, VHP-30, VHS-50, VHS-60/3, VT30, VT50
1770215
ADAPTER
574
574
1782920
ADAPTER
574, 574B
574, 574B
1701577
ADAPTER
574
574
1684760
ADAPTER
574
574
2133257
ADAPTER-FAN
550B, 554, 560B, 564, 574B
550B, 554, 560B, 564, 574B
1626119
ADAPTER
HH75
HH75
1863976
ADAPTER AS
320C, 320C FM
320C, 320C FM
1863975
ADAPTER AS
320C, 320C FM
320C, 320C FM
2384C, 2484C, 320C, 559C, 579C, HH500
320C, 320D, 320D L, 320D LRR, 320D RR, 322C, 323D L, 323D LN, 323D2 L, 324D, 324D L, 324D LN, 324E L, 324E LN, 325B L, 325C, 325D L, 329D, 329D L, 329E, 329E L, 329E LN, 330C L, 330D L, 336D, 336D L, ...