ADAPTER GP-REMOTE OIL FILTER 2462061 - Caterpillar

PARTS DISPOSITION
Since this program is valid for true pump failureonly, dealers are asked to contact the Medium Wheel Loader Product SupportGroup in Gosselies prior to any gear pump replacement. The dealer may beasked to keep the failed iron for possible PRR.Attach. (1-Rework Procedure)Rework Procedure
Procedure for removing implement pump fromvehicle:Reference: RENR2116 ? Disassembly and Assembly? 966G Wheel Loader and 972G Wheel Loader Machine SystemsReference: RENR4366 ? Disassembly and Assembly? 966G Series II Wheel Loader and 972G Series II Wheel Loader Machine Systems
Remove cab. Refer to Disassembly and Assembly,"Cab - Remove ? Removal Procedure".
Remove Pilot and Brake Pump.
Remove Steering Pump. Refer to Disassembly andAssembly, "Piston Pump (Steering) - Remove".
Remove Implement Pump. Refer to Disassembly andAssembly, "Vane Pump (Implement) - Remove".
Procedure for returning machine to operatingcondition:Reference: RENR2116 ? Disassembly and Assembly? 966G Wheel Loader and 972G Wheel Loader Machine SystemsReference: RENR4366 ? Disassembly and Assembly? 966G Series II Wheel Loader and 972G Series II Wheel Loader Machine SystemsReference: SENR3130 ? Torque SpecificationsReference: SEBF8493 ? Contamination ControlGuideline ? Procedure for Kidney Looping Small and Medium Wheel Loader,Landfill and Soil Compactor, and Integrated Tool Carrier Hydraulic OilReference: SEBU6250 ? Caterpillar Machine FluidsRecommendations
Install 2445447 Pump Group and connect new dischargehose. The 1329713 Coupling Assembly and mounting bolts may be reused ifin good condition. Replace 5F3106 O-ring Seal. Refer to Illustration 2for pump orientation and additional information needed in the next steps.
Install 6V8625 Elbow, using 3K0360 and 6V8398seals, into the 2445447 Pump Group bearing drain port.
Install Steering pump using a 2326546 Couplingkit. Use new 9X7371 O-ring Seal between steering pump and 2445447 PumpGroup. Fasten steer pump to 2445447 Pump Group using 6V5686 Bolts with9X8268 Washers.
Connect the 2307549 Hose assembly between theimplement pump bearing drain port and the steering pump case drain port.Connect existing Steering Pump case drain line to the Tee assembly.
Install Pilot and Brake Pump.
Pre-fill the implement, steering, pilot and brakepumps with recommended hydraulic oil before installing cab. Always useclean oil when you add oil to the system. Clean oil must be at an ISO levelof at least 16/13.
Install Cab. Refer to Disassembly and Assembly,"Cab ? Install". Tighten the four cab mounting bolts to a torque of 850+/- 100 N.m (629 +/- 74 lb. ft.).
Before starting engine, fill hydraulic tank withrecommended hydraulic oil. Always use clean oil when you add oil to thesystem. Clean oil must be at an ISO level of at least 16/13.
Crank the engine at least five times without startingthe engine. Wait for at least five seconds between cranks in order to allowthe oil to flow smoothly through the system.
Check the oil level in the hydraulic