ADAPTER 2916025 - Caterpillar

Illustration 1 g00861901
Main frame and support cradleRetract the boom and raise the boom away from the main frame and support cradle (1) . Support the boom with a suitable stand. To properly support the boom, use the following tools:
Table 1
Required Tools    
Part Number    Description    Quantity    
8S-7641     Tube     1    
4C-6486     Stand     1    
8S-7615     Pin     1    
8S-7625     Collar     1    
8S-8048     Saddle     1    Inspect the complete main frame and the support cradle. Inspect the main frame and the support cradle particularly in welded structures.Pay particular attention to the mounting points for the following parts:
Boom
Cab
Axles
Engine
Transmission
Towing attachment (if equipped)
Mountings on the frame
Stabilizers
Tie down lugs
Illustration 2 g00836172
Stabilizer and rollover protection structureLower stabilizers (2) until the stabilizer pads are touching the ground. Inspect each stabilizer fully. Inspect the beams, stabilizer pads, mounting hardware, cylinders and the pivot pins.If equipped, inspect the Rollover Protection Structure (ROPS) (3) or inspect the Falling Objects Protection Structure (FOPS) (3) . Inspect the ROPS or the FOPS carefully. Do not attempt to straighten the structure. Do not attempt to repair the structure by welding. Consult your Caterpillar dealer if damage is found to the ROPS or to the FOPS.
Illustration 3 g00836174
Boom and quick couplerInspect all sections of boom (4) . Inspect the boom after the boom is extended fully and the work tool is on the ground.Completely inspect quick coupler (5) . Also, inspect the work tool.
Illustration 4 g01080214
Pivot pins and anchor pointsInspect all pivot pins and inspect all anchor points for wear.