2971577 ADAPTER Caterpillar parts
M313D, M315D, M316D, M318D, M322D, M322D MH
Rating:
Alternative (cross code) number:
CA2971577
297-1577
2971577
CA2971577
297-1577
2971577
Weight: 2 pounds 1 kg.
WHEELED EXCAVATOR,
Compatible equipment models: 2971577:
Number on catalog scheme:
2
For full view, you need register
Information:
Backup Alarm Relay
Illustration 3 g01689526
Backup alarm relayThe backup alarm relay is controlled by the chassis ECM through an on/off output driver.The backup alarm alerts the surrounding personnel that the machine is backing up. When the drivetrain is requested to go into REVERSE, the ECM turns on the relay output driver and the backup alarm activates.Brake Accumulator Purge Solenoid
Illustration 4 g01955479
Brake accumulator purge solenoidThe brake accumulator purge solenoid is an output of the ECM. The brake accumulator purge solenoid connects to the ECM at connector contact J1-12. The steering accumulator purge solenoid purges the brake accumulator after normal engine shutdown.Machine Lockout Lamp
The lamp is an output of the ECM. The lamp illuminates when the machine lockout mode is activated. The indicator flashes continuously when a machine lockout is attempted and the required conditions are not met.The indicator is mounted on the exterior of the machine. The indicator is visible from the front bumper. The base of the indicator has two terminals. One terminal connects to the chassis ECM at connector contact J2-10. The second terminal connects to the terminal for the positive battery voltage.Secondary Steer Relay
Illustration 5 g01689526
Secondary steer relayThe relay is an output of the chassis ECM. The relay connects to connector contact J2-2 of the chassis ECM. The primary function of this relay is controlling the secondary steering pump. The relay has a terminal that sends data to the ECM to indicate the status of the motor. The ECM records diagnostic codes that occur with the start relay as a CID 0420.The secondary steering relay is energized if any of the following conditions are satisfied:
Steering accumulator pressure is low and engine speed is greater than 500 rpm.
Steering accumulator Pressure is low and machine speed is greater than 5 mph.The secondary steering provides pressure to the steering system, allowing the machine to be steered by the operator until primary steering has been restored. The secondary steering pump motor is cycled on and off to provide the pressure to the steering system. The chassis ECM engages the secondary steering intermediate relay in the cab according to the output of the secondary steering pressure sensor. The secondary steering intermediate relay drives the secondary steering relay.Solenoid (Hoist Raise)
Illustration 6 g00495641
Hoist raise solenoidThe body raise solenoid is an output of the ECM. The solenoid connects to the ECM at connector contact J1-62. When the solenoid receives the voltage, the solenoid activates the valve
Illustration 3 g01689526
Backup alarm relayThe backup alarm relay is controlled by the chassis ECM through an on/off output driver.The backup alarm alerts the surrounding personnel that the machine is backing up. When the drivetrain is requested to go into REVERSE, the ECM turns on the relay output driver and the backup alarm activates.Brake Accumulator Purge Solenoid
Illustration 4 g01955479
Brake accumulator purge solenoidThe brake accumulator purge solenoid is an output of the ECM. The brake accumulator purge solenoid connects to the ECM at connector contact J1-12. The steering accumulator purge solenoid purges the brake accumulator after normal engine shutdown.Machine Lockout Lamp
The lamp is an output of the ECM. The lamp illuminates when the machine lockout mode is activated. The indicator flashes continuously when a machine lockout is attempted and the required conditions are not met.The indicator is mounted on the exterior of the machine. The indicator is visible from the front bumper. The base of the indicator has two terminals. One terminal connects to the chassis ECM at connector contact J2-10. The second terminal connects to the terminal for the positive battery voltage.Secondary Steer Relay
Illustration 5 g01689526
Secondary steer relayThe relay is an output of the chassis ECM. The relay connects to connector contact J2-2 of the chassis ECM. The primary function of this relay is controlling the secondary steering pump. The relay has a terminal that sends data to the ECM to indicate the status of the motor. The ECM records diagnostic codes that occur with the start relay as a CID 0420.The secondary steering relay is energized if any of the following conditions are satisfied:
Steering accumulator pressure is low and engine speed is greater than 500 rpm.
Steering accumulator Pressure is low and machine speed is greater than 5 mph.The secondary steering provides pressure to the steering system, allowing the machine to be steered by the operator until primary steering has been restored. The secondary steering pump motor is cycled on and off to provide the pressure to the steering system. The chassis ECM engages the secondary steering intermediate relay in the cab according to the output of the secondary steering pressure sensor. The secondary steering intermediate relay drives the secondary steering relay.Solenoid (Hoist Raise)
Illustration 6 g00495641
Hoist raise solenoidThe body raise solenoid is an output of the ECM. The solenoid connects to the ECM at connector contact J1-62. When the solenoid receives the voltage, the solenoid activates the valve
Caterpillar parts catalog:
Parts adapter Caterpillar catalog:
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H NA, 12K, 12M, 135H, 135H NA, 140G, 140H, 140H NA, 140K, 140K 2, 140M, 143H, 14H, 160H, 160K, 163H, 16H, 16M, 215D, 225, 225D, 229, 229D, 231D, 235,...
307C, 308C, 311, 311B, 311C, 311D LRR, 311F LRR, 312, 312B, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 313D2 LGP, 314C, 314D CR, 314D LCR, 314E CR, ...
3355814
ADAPTER-FLANGE
M318D MH, M322D MH
M318D MH, M322D MH
2801946
ADAPTER-TIP
M313D
M313D
2801945
ADAPTER-TIP
M313D
M313D
1681253
ADAPTER-TIP
311D LRR, 312D, 312D L, 312D2, 312D2 GC, 312E, 314D CR, 314D LCR, 316E L, M313D, M315D 2
311D LRR, 312D, 312D L, 312D2, 312D2 GC, 312E, 314D CR, 314D LCR, 316E L, M313D, M315D 2
3661893
ADAPTER
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
3289815
ADAPTER-ELBOW
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
3637906
ADAPTER-CAP
M313D, M315D
M313D, M315D
3676012
ADAPTER-TEE
M313D, M315D, M315D 2, M317D 2
M313D, M315D, M315D 2, M317D 2
3997674
ADAPTER AS
M313D, M315D
M313D, M315D
2760175
ADAPTER
M322D, M322D MH
M322D, M322D MH
2754913
ADAPTER
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
1681969
ADAPTER AS
24M, 315D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 320D2, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL,...
24M, 315D L, 319D, 319D L, 319D LN, 320D, 320D FM, 320D L, 320D LRR, 320D RR, 320D2, 321D LCR, 323D L, 323D LN, 323D SA, 323D2 L, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 325D, 325D FM, 325D FM LL,...
3260299
ADAPTER AS
312D, 315D L, 319D, 319D L, 319D LN, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777G, 994H
312D, 315D L, 319D, 319D L, 319D LN, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777G, 994H
3218666
ADAPTER
312D L, 312D2, 312D2 L, 312E, 312E L, 313D2 LGP, 315D L, 316E L, 318D2 L, 318E L, 319D L, 320D, 320D2, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D2 L, 323E L, 776C, D6R STD, D9N
312D L, 312D2, 312D2 L, 312E, 312E L, 313D2 LGP, 315D L, 316E L, 318D2 L, 318E L, 319D L, 320D, 320D2, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D2 L, 323E L, 776C, D6R STD, D9N
3218667
ADAPTER GP-PLUG
312D L, 312D2, 312D2 L, 312E, 312E L, 313D2 LGP, 315D L, 316E L, 318D2 L, 318E L, 319D L, 320D, 320D2, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D2 L, 323E L, 776C, D6R STD
312D L, 312D2, 312D2 L, 312E, 312E L, 313D2 LGP, 315D L, 316E L, 318D2 L, 318E L, 319D L, 320D, 320D2, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321D LCR, 323D2 L, 323E L, 776C, D6R STD
3636122
ADAPTER-FILTER
315D L, 318D L, 318D2 L, 319D L, 319D LN, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LN, 336F L, 349E, 349E L, 349E L ...
315D L, 318D L, 318D2 L, 319D L, 319D LN, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, 324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E HVG, 336E L, 336E LN, 336F L, 349E, 349E L, 349E L ...
3595079
ADAPTER
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
3595087
ADAPTER AS
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
2765282
ADAPTER
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH, M325D L MH, M325D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH, M325D L MH, M325D MH
2267787
ADAPTER
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH, M325D L MH, M325D MH
M313D, M315D, M316D, M318D, M318D MH, M322D, M322D MH, M325D L MH, M325D MH
315D L, 330D L, 561H, 561M, 561N, 950K, 962K, 966F II, CB-14, CB-214D, CB-214E, CW-34, M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH, MH3037, PIN GRAB
2614773
ADAPTER
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH