ADAPTER GP-FAST FILL FUEL 3320721 - Caterpillar

Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-9760     Jack Stand     2    
B     5P-4758     Retaining Ring Pliers     1    
C     3J-9511     Sleeve Bearing     1    
5F-7693 Spacer As     1    
1P-0520 Driver     1    Start By:
Remove the shell assembly. Refer to Disassembly and Assembly, "Shell Assembly - Remove".
Illustration 1 g00869492
Use Tooling (A) in order to stabilize shell assembly (1) .
Illustration 2 g00869493
Attach nylon lifting slings to hydraulic cylinder (2) and a hoist. Remove pin assembly (3) in order to remove hydraulic cylinder (2) from shell assembly (1). The weight of hydraulic cylinder (2) is approximately 50 kg (110 lb).
Illustration 3 g00869495
Use Tooling (B) in order to remove retaining ring (4) .
Illustration 4 g00869496
Put hydraulic cylinder (2) in a shop press and install Tooling (C) in order to remove bearing (5) (not shown) from the rod end of hydraulic cylinder (2) .
Repeat Step 3 through Step 4 in order to remove the bearing from the head end of hydraulic cylinder (2) .Installation Procedure
Table 2
Required Tools    
Tool     Part Number     Part Description     Qty    
A     1U-9760     Jack Stand     2    
B     5P-4758     Retaining Ring Pliers     1    
C     3J-9511     Sleeve Bearing     1    
5F-7693 Spacer As     1    
1P-0520 Driver     1    
Illustration 5 g00869496
Put hydraulic cylinder (2) in a shop press and install Tooling (C) in order to install bearing (5) (not shown) to the rod end of hydraulic cylinder (2) .
Illustration 6 g00869495
Use Tooling (B) in order to install retaining ring (4) .
Repeat Steps 1 through Step 2 in order to install the bearing to the head end of hydraulic cylinder (2) .
Illustration 7 g00869493
Attach nylon lifting slings to hydraulic cylinder (2) and a hoist. Install pin assembly (3) in order to install hydraulic cylinder (2) to shell assembly (1). The weight of hydraulic cylinder (2) is approximately 50 kg (110 lb).End By: Install the shell assembly. Refer to Disassembly and Assembly, "Shell Assembly - Install".