ADAPTER-TIP 3683766 - Caterpillar

Disassembly Procedure
Start By:
Remove the final drive planetary.
Remove the axle housing, axle shaft, and wheel flange.
Illustration 1 g03652782
Remove axle shaft (3). Remove sleeve (2). Remove retaining ring (2) from sleeve (1) .
Illustration 2 g03253758
Remove axle shaft (4) .
Illustration 3 g03641788
Remove bolts (6), Washer (5) .
Illustration 4 g03641789
Remove ring gear (7) .
Illustration 5 g03641790
Remove retaining ring (10). Check the wear conditions of the components.
Use bolts (6) to remove carrier (8) from ring gear (7). Remove bushings (9) from carrier (8). Inspect bushings (9), replace if required
Illustration 6 g03641801
Remove flange (11) .
Illustration 7 g03641792
Remove bearing cone (13) and seal ring (12) .Note: This is a destructive operation for seal ring (12) .
Illustration 8 g03641791
Position wheel flange (11) on a flat surface. Remove O-ring seal (15) and bearing cone (17) .
Remove bearing cups (14) and (16).
Illustration 9 g03641793
If necessary, remove seal ring (19) and bushing (18)