ADAPTER-TIP 3683781 - Caterpillar

The 1Up display shows one engine parameter at a time.Use button 3 and button 4 to view the next engine parameter.The top banner will display, from left to right, "Slow Vessel Mode" (SVM) status, after treatment status, current gear, maintenance, and wait to start.The current gear will be shown as one of the following:
Neutral (N)
Forward (F)
Reverse (R)The bottom banner will always display, from left to right, engine hours, and fuel rate.4Up Display
Illustration 7 g03723805
The 4Up display shows four engine parameters at once.Use button 3 and the button 4 to view the next four engine parameters.The top banner will display, from left to right, SVM status, after treatment status, current gear, maintenance, and wait to start.The current gear will be shown as one of the following:
Neutral (N)
Forward (F)
Reverse (R)The bottom banner will always display, from left to right, engine hours, and fuel rate.Display View
Perform the following steps to change the currently set display view.
From the main menu screen, use button 3 and button 4 to scroll through the menu until "Display Settings" is highlighted. Refer to Illustration 8.
Illustration 8 g03723849
Press button 5 to enter the "Display Settings" menu.
From the display settings screen, use button 3 and button 4 to scroll through the menu until the "Gauge Display" is highlighted. Refer to Illustration 8.
Press button 5 to change the display from "4Up" to "1Up" or from "1Up" to "4Up".
To exit the main menu, press button 2.Custom 4Up Display
The custom 4Up display feature allows the user to customize the organization of the engine parameters on the 4Up display.
Illustration 9 g03724446
From the main menu screen, use button 3 and button 4 to scroll through the menu until "Display Settings" is highlighted. Refer to Illustration 9.
Press button 5 to enter the "Display Settings" menu. Refer to Illustration 9.
From the display settings screen, use button 3 and button 4 to scroll through the menu until "Custom 4Up Display" is highlighted. Refer to Illustration 9.
Press button 5, "ENTER" button, to access the 4Up custom setup dialog.
Use button 1 to move the selector triangle through each one of the four displayed engine parameters.
Use button 6 to cycle through the different options of possible engine parameters that can be displayed.
Use buttons 3 and 4 to view the next four engine parameters to customize.
Press the "LIST" button (button 2) to save your changes and return to the 4Up setup menu.Reset 4UP Display
The "Reset 4UP Display" feature allows the user to reset the organization of the engine parameters on the 4Up display back to factory the settings.The factory defaults on view 1 are:
Engine Speed
Oil Pressure
Coolant Temperature
Battery VoltageThe factory defaults on view 2 are:
% Load
Boost Pressure
Desired Engine Speed
Engine Hours
Illustration 10 g03724566
Start from the main menu screen. Use the LEFT and RIGHT arrow buttons to scroll through the menu until "Display Settings" is highlighted.
Press the "ENTER" button (button 5) to enter the Display Settings Menu
From the "Display Settings" screen, use buttons 3 and 4 to scroll through the menu until "Reset 4Up Display" is highlighted.
Press the "ENTER" button (button 5).Units
The units of the displayed parameters