ADAPTER AS-EXHAUST 3834141 - Caterpillar

3834141 ADAPTER AS-EXHAUST Caterpillar parts 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323E L, C4.4, C6.6

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3834141
383-4141
3834141

Weight: 0.90 pounds 0 kg.

Buy ADAPTER AS-EXHAUST 3834141 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR, INDUSTRIAL ENGINE,

This part in 2 request: Show. This information for suppliers only!

#1163577 3834141

2023-07-13

#1163457 3834141

2023-07-13

Compatible equipment models: 3834141:

EXCAVATOR 320E 320E L 320E LN 320E LRR 320E RR 323E L

INDUSTRIAL ENGINE C4.4 C6.6 Caterpillar

Number on catalog scheme: 4

Caterpillar 3834141 Parts scheme ADAPTER AS-EXHAUST

For full view, you need register

Information:

Install two rubber bumpers (34). Apply Tooling (B) to the scissor assembly at the point of installation for four rollers (37). Install four bushings (39) and four rollers (37).
Position air compressor (35) in scissor assembly (15). Install clamp (36) and tie-wrap (38) to secure air compressor (35) to the scissor assembly. Tighten clamp (36) to a torque of 3.2 0.6 N m (29 5 lb in).
Illustration 2 g00275786
Connect tube (30) to fitting (33). Make sure that the tube is securely seated in the fitting.
Illustration 3 g00275785
Position wiring harness (26). Connect two electrical connectors (31) in the original positions. Install tie-wraps (32) to secure wiring harness (26) to scissor assembly (15).
Illustration 4 g00275783
Connect tube (30) to fitting (28). Make sure that the tube is securely seated in the fitting. Apply Tooling (A) to the threads of bolt (27). Position air spring (29) on the scissor assembly. Install bolt (27) to secure air spring (29). Tighten bolt (27) to a torque of 4.3 1 N m (38 9 lb in).
Illustration 5 g00275782
Install wiring harness connection (25) and the washer in upper housing (24). Install new tie-wraps on wiring harness (26) to secure the wiring harness to the upper housing.
Illustration 6 g00275780
Install scissor assembly (15) in upper housing (24) by sliding rollers (21) into the slider track. Slide bumper (22) into the slider track to secure the scissor assembly. Install two tether belts (16), bolts (23) and the locknuts in upper housing (24). Tighten bolts (23) to a torque of 40 8 N m (30 6 lb ft).
Illustration 7 g00275778
Install two bearings (17), damper (18), pin (20) and nut (10) into lower housing (14). Tighten nut (19) to a torque of 40 8 N m (30 6 lb ft).
Illustration 8 g00275777
Install scissor assembly (15) into lower housing (14). Connect the damper and two tether belts (16) to lower housing (14).
Illustration 9 g00275776
Illustration 10 g00275755
Apply 9S-3263 Thread Lock on bolt (10). Position the air spring on lower housing (14). Install bolt (10). Tighten bolt (10) to a torque of 4.3 1 N m (38 9 lb in). Install two shafts (13). Install four locknuts (11) and lock washers (12). Tighten locknuts (11) to a torque of 40 8 N m (30 6 lb ft).
Illustration 11 g00275754
Install bushing (9) into the lower housing.
Illustration 12 g00275753
Install boot (8).
Illustration 13 g00291077
Position fore and aft slider track (7). Install two bolts (3), the washers, one bolt (2) and locknut (4). Tighten bolts (2) and (3) to a torque of 30 7 N m (22 5 lb ft). Also, tighten locknut (4) to a torque of 30 7 N m (22 5 lb ft).
Illustration 14 g00275751
Install four slides (1).
Install the seat on the air suspension. Install the seat assembly in the machine.