ADAPTER 4200046 - Caterpillar

Removal Procedure
Illustration 1 g02205415
The fuel manifold is located on the Clean Emissions Manual.
Illustration 2 g02205416
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This action will help to prevent dirt from entering the internal mechanism.
Remove nut (6), washer (5), and solenoid (4) from valve assembly (1) .
Remove cartridge assembly (3) and remove O-ring seals (2) .Installation Procedure
Install the solenoid valve (ARD main fuel) in the reverse order of removal.
Tighten cartridge assembly (3) to a torque of 50 5 N m (37 4 lb ft).
Tighten the nut (6) to a torque of 20 2.5 N m (177 22 lb in).