ADAPTER GP-FAN 4226569 - Caterpillar

Pinch Point
Working Load Limit (WLL) mark - Do not use lifting device unless load identification (WLL) markings are legible.
Safety Alert - Do not use C-Frame lifting device for anything other than the intended purpose. Hazard Avoidance
Crushing hazard
Pinch point
Safety alert symbol General Information Section
Illustration 3 g03050725
The 371-7501 Differential Lifting Bracket is used for removal and installation of the differential group in the rear axle housing of 773G and 775G Off-Highway Trucks.Specifications
Illustration 4 g03083556
Table 1
No.     Quantity     Part No.     Description    
1     1     371-7501     Differential Lifting Bracket    
2     4     1F-7958     1/2" Nut    
3     4     5P-8245     1/2" Washer    
4     4     8B-7979     Bolt    
5     4     5P-8245     M12 Washer    
6     4     8C-8729     M12 x 1.75 x 80mm    Operation Section
The 371-7501 Differential Lifting Bracket has a working load limit (WLL) of 907.18 kg (2000 lb).
Illustration 5 g03083759
Remove (4) M12 hex bolts from the bearing cage.
Position 371-7501 Differential Lifting Bracket using an appropriate overhead lifting frame.
Secure frame to the bearing cage with (4) M12 x 1.75 x 80 mm, 8C-8729 5 HCS and tighten to 100 Nm.
Secure the frame to the carriage assembly with (4) 1/2 x 13 x 2 1/2" 8B-7979 5 HCS , (8) 1/2" 5P-8245 Flat Washers , and (4) 1/2" 1F-7958 Hex Nuts . Tighten to 100 Nm.ReferencesRefer to Disassembly and Assembly Manual KENR9962 for specific applications, approved mounting and lifting hardware, and location of lifting points for 773G and 775G Off-Highway Trucks.Maintenance
Inspection
Inspect tooling prior to each use for dents, cracks, bent, or worn parts. If damage is found, destroy the tool and dispose of as scrap. Replace with new product.
Do not use unless the Working Load Limit (WLL) identification markings are legible.
Do not use if lifting bracket is bent, cracked, or damaged. Do not use if lifting holes are elongated.
Illustration 6 g03026177
Do not use if hardware is damaged or missing.
Have the tooling inspected annually by an approved inspector.Cleaning
Clean the tooling using a non-solvent based cleaner.Storage
Store the tooling in a clean, dry location to prevent rust or corrosion. The tool should also be stored in the most stable position.Tool Disposal
At the end of the operational life of the tool, destroy the tool and dispose of as scrap.Additional Contact Information
For additional product support questions concerning this tool, contact the Cat Dealer Service Tools Hotline at:USA: 1-800-542-8665, Option 1International: 1-309-578-7372Email: dealerservicetool_hotline