ADAPTER 4234536 - Caterpillar

Table 1
Diagnostic Codes for the Caterpillar Advisor or Messenger ECM (MID No. 053)(1)
For troubleshooting, see the procedure with the same CID FMI.
CID / FMI Description
CID 0168 - Electrical System Voltage
FMI 03 Voltage above normal or shorted high.
FMI 04 Voltage below normal or shorted low.
CID 0271 - Action Alarm
FMI 03 Voltage above normal or shorted high.
FMI 04 Voltage below normal or shorted low.
FMI 05 Current low
CID 0268 - Programmed Parameter Fault
FMI 02 Data erratic, intermittent, or incorrect.
CID 0533 - Brake Control Module
FMI 02 Data erratic, intermittent, or incorrect.
FMI 09 Abnormal update.
FMI 14 Special Instruction.
CID 0590 - Engine Electronic Control Module
FMI 02 Incorrect signal.
FMI 09 Abnormal update.
FMI 12 Failed component or device.
CID 0800 - VIMS Main Module
FMI 02 Incorrect signal.
FMI 09 Abnormal update.
FMI 12 Failed component or device.
CID 0811 - Gauge Cluster
FMI 09 Abnormal update.
CID 1089- VIMS Analysis Module
FMI 02 Data erratic, intermittent, or incorrect.
FMI 09 Abnormal update.
FMI 14 Special Instruction.
CID 1273- Chassis Control Module
FMI 02 Data erratic, intermittent, or incorrect.
FMI 09 Abnormal update.
FMI 14 Special Instruction.
(1) For the Caterpillar Advisor ECM, the MID is 053. This table pertains only to a diagnostic code with a MID of 053.