4510351 ADAPTER AS- Caterpillar parts
Rating:
Alternative (cross code) number:
CA4510351
451-0351
4510351
CA4510351
451-0351
4510351
Weight: 0.88 pounds 0 kg.
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
WeatherTech Custom Fit FloorLiners for Ford Super Duty - 1st Row - Over The Hump (4510351), Tan
WeatherTech Fits select 2023-2024 Ford Super Duty Models. Please confirm fitment to your year, make, and model in Amazon ConfirmedFit prior to purchase. || Coverage Area: 1st Row - Over The Hump, Color: Tan || The FloorLiner is proudly designed, engineered, and manufactured with American made tooling in the USA. || A patented High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as a tactile feel to the surface! Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving! || Images may be representative and may not reflect the actual vehicle or part.
WeatherTech Fits select 2023-2024 Ford Super Duty Models. Please confirm fitment to your year, make, and model in Amazon ConfirmedFit prior to purchase. || Coverage Area: 1st Row - Over The Hump, Color: Tan || The FloorLiner is proudly designed, engineered, and manufactured with American made tooling in the USA. || A patented High-Density Tri-Extruded (HDTE) material allows for a rigid core for strength while offering surface friction to the carpet, as well as a tactile feel to the surface! Advanced surfacing creates channels that carry fluids and debris to a lower reservoir with further channeling to help minimize fluid movement while driving! || Images may be representative and may not reflect the actual vehicle or part.
For full view, you need register
Information:
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
B 1U-8846 Gasket Sealant 1
Illustration 1 g01221063
Attach Tooling (A) and a suitable lifting device onto flywheel housing (24). The weight of flywheel housing (24) is approximately 726 kg (1600 lb). Apply Tooling (B) to the mating surface of flywheel housing (24). Position flywheel housing (24). Install bolts (26).
Illustration 2 g01220583
Install bolts (25) that connect the oil pan to flywheel housing (24).
Illustration 3 g01220569
Install crankshaft position sensor (22). Install bolt (21). Connect harness assembly (23).
Illustration 4 g01220568
Install cover (20). Install bolts (18). Connect harness assembly (19).
Illustration 5 g02092756
Connect tube assembly (17).
Illustration 6 g01219847
Install bolts (14) in order to connect bracket (15) to intake manifold (16). Repeat for the opposite side.
Illustration 7 g01219825
Install cam gear (13). Install bolts (12).
Illustration 8 g01219824
Install cover (11). Install bolts (10). Install cover (9). Install bolts (8).
Illustration 9 g01219823
Install tube assembly (7). Connect harness assembly (6). Install bracket (5). Install bolts (4). Repeat for the opposite side.
Illustration 10 g01219819
Install tubes (3). Connect clamps (2). Connect clamp (1). End By:
Install the starters. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install" and Disassembly and Assembly, "Air Starting Motor - Install".
Install the aftercooler. Refer to Disassembly and Assembly, "Aftercooler - Remove and Install".
Install the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Install".
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2
B 1U-8846 Gasket Sealant 1
Illustration 1 g01221063
Attach Tooling (A) and a suitable lifting device onto flywheel housing (24). The weight of flywheel housing (24) is approximately 726 kg (1600 lb). Apply Tooling (B) to the mating surface of flywheel housing (24). Position flywheel housing (24). Install bolts (26).
Illustration 2 g01220583
Install bolts (25) that connect the oil pan to flywheel housing (24).
Illustration 3 g01220569
Install crankshaft position sensor (22). Install bolt (21). Connect harness assembly (23).
Illustration 4 g01220568
Install cover (20). Install bolts (18). Connect harness assembly (19).
Illustration 5 g02092756
Connect tube assembly (17).
Illustration 6 g01219847
Install bolts (14) in order to connect bracket (15) to intake manifold (16). Repeat for the opposite side.
Illustration 7 g01219825
Install cam gear (13). Install bolts (12).
Illustration 8 g01219824
Install cover (11). Install bolts (10). Install cover (9). Install bolts (8).
Illustration 9 g01219823
Install tube assembly (7). Connect harness assembly (6). Install bracket (5). Install bolts (4). Repeat for the opposite side.
Illustration 10 g01219819
Install tubes (3). Connect clamps (2). Connect clamp (1). End By:
Install the starters. Refer to Disassembly and Assembly, "Electric Starting Motor - Remove and Install" and Disassembly and Assembly, "Air Starting Motor - Install".
Install the aftercooler. Refer to Disassembly and Assembly, "Aftercooler - Remove and Install".
Install the crankshaft rear seal. Refer to Disassembly and Assembly, "Crankshaft Rear Seal - Install".
Parts adapter Caterpillar catalog:
4506676
ADAPTER-RAM
Caterpillar
Caterpillar
4506675
ADAPTER-RAM
Caterpillar
Caterpillar
4504258
ADAPTER AS
Caterpillar
Caterpillar
4503572
ADAPTER
Caterpillar
Caterpillar
4502893
ADAPTER-ELBOW
Caterpillar
Caterpillar
4502892
ADAPTER-
Caterpillar
Caterpillar
4510370
ADAPTER AS-STR
Caterpillar
Caterpillar
4510368
ADAPTER AS-TEE
Caterpillar
Caterpillar
4510366
ADAPTER AS-STR
Caterpillar
Caterpillar
4510359
ADAPTER AS-STR
Caterpillar
Caterpillar
4510358
ADAPTER-STR
Caterpillar
Caterpillar
4510354
ADAPTER AS-
Caterpillar
Caterpillar