ADAPTER GP 4596519 - Caterpillar

Disassembly Procedure
Start By:
Remove the torque converter outlet relief valve. Refer to Disassembly and Assembly, "Torque Converter Outlet Relief Valve - Remove". Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Dirt and contaminants can damage the precision components. All disassembly and assembly procedures must be performed on a clean work surface. Clean all the interior components in clean solvent. Dry all the interior components with compressed air. Plug ports and plug hoses on the machine during repair.
Illustration 1 g00747886
Remove O-ring seals (2) from valve (1).
Illustration 2 g00747887
Remove the bolts and flange assembly (5) from the body.
Remove bolts and covers (3) and (7). Remove O-rings (4) and (6).
Remove spring (9) and spool assembly (8).
Illustration 3 g00747888
Remove retainer ring (10), retainer (12), spring (11) and poppet (13) from spool assembly (8).
Remove spacers (14) from the inside of spool assembly (8).