ADAPTER 4P4014 - Caterpillar

Disconnect plug (1) from brake accumulator oil pressure switch for brake application (6) .
Disconnect plug (2) from brake accumulator oil pressure switch for alert indicator (3) .
Remove and retain 6V-0484 Elbow (4) and 3J-1907 O-Ring Seal (5) .
Remove and discard brake accumulator oil pressure switch for alert indicator (3), brake accumulator oil pressure switch for brake application (6), and tee (7) .
Illustration 2 g03359320
Typical arrangement (4) 6V-0484 Elbow (5) 3J-1907 O-Ring Seal (8) 421-9097 Pressure Sensor (9) 5P-6944 Adapter (10) 3K-0360 O-Ring Seal
Install 5P-6944 Adapter (9) and 3K-0360 O-Ring Seal (10) .
Install 6V-0484 Elbow (4) and 3J-1907 O-Ring Seal (5) retained in Step 9.
Install 421-9097 Pressure Sensor (8) to a torque of 25 N m to 50 N m (19 lb ft to 37 lb ft).
Illustration 3 g03359321
(11) 361-8403 Sensor Harness As
Install 361-8403 Sensor Harness As (11) .
Illustration 4 g03359798
Illustration of 421-9096 Harness As (1) Plug (2) Plug (11) 361-8403 Sensor Harness As (12) 421-9096 Harness As (A) 4-pin plug (B) 3-pin plug with purple and black wires installed (C) 3-pin plug with gray and black wires installed (D) Single orange wire
Install plug (1), plug (2), and 361-8403 Sensor Harness As (11) to 421-9096 Harness As (12). Refer to Illustration 4.Note: Plug (1) has black and gray wires installed. Plug (2) has black and purple wires installed.
Illustration 5 g03359322
Typical existing arrangement (13) Plug
Illustration 6 g03359324
(13) Plug (14) Bracket (15) Receptacle assembly
Remove plug (13) and receptacle assembly (15) from bracket (14) .
Illustration 7 g03359323
Representation of the existing wiring arrangement (13) Plug (15) Receptacle assembly (16) Seal plug
Remove and discard seal plug (16) from pin 5 of plug (13) .
Illustration 8 g03359786
Representation of the existing wiring arrangement (13) Plug (15) Receptacle assembly (17) Wedge
Remove and discard receptacle assembly (15). Retain wedge (17) .
Illustration 9 g03359790
Representation of the new wiring arrangement (13) Plug (17) Wedge (not shown) (18) 210-6312 Receptacle As (D) single orange wire
Install 421-9096 Harness As (12) single orange wire (D) to pin 5 of plug (13) .
Install 210-6312 Receptacle As (18) and wedge (17) retained in Step 18.
Illustration 10 g03360205
(13) Plug (14) Bracket
Secure plug (13) using bracket (14). Refer to Illustration 10.
Secure loose wires using four 1S-9593 Cable Straps .