ADAPTER 4W4313 - Caterpillar

Illustration 18 g06029938
Apply Anti-Seize Compound (C) to the Plugs (15). Install the plugs into the in-board Collet (16). Torque each plug to 12 3 N m (9 2 lb ft).Install the plugs into the out-board Collet (15). Torque each plug to 12 3 N m (9 2 lb ft).
Illustration 19 g06029579
Perform the following steps to complete the pin installation process.
Tighten 3E-8009 Bolt (18) to a torque of 1800 200 N m (1330 150 lb ft).
Strike the collets and the tilt cylinder rod end with a hammer until the bolt torque drops to 950 N m (700 lb ft).
Tighten 3E-8009 Bolt (18) to a torque of 1800 200 N m (1330 150 lb ft).
Strike the collets and the tilt cylinder rod end with a hammer until the bolt torque drops to 1600 N m (1180 lb ft).
Tighten 3E-8009 Bolt (18) to a torque of 1800 200 N m (1330 150 lb ft).Note: After the bolt is tightened, each collet should extend the same distance from the lift arm.Torque the bolts after the machine has operated for 8 hours and after the machine has operated for 50 hours.
Illustration 20 g06029850
Position the 1P-3705 Rectangular Seal (D) in place on the 357-6226 Manifold (E).Install the 423-0172 Hose As (4). Secure the Hose As to the Manifold with two 5P-8077 Half Flanges (F), four 8T-4140 Bolts (G), and four 8T-4122 Hard Washers (H).Torque the bolts to 240 40 N m (175 30 lb ft).
Illustration 21 g06029855
Position the 1P-3705 Rectangular Seal (D) in place on the 357-6226 Manifold (E).Install the 423-0172 Hose As (4). Secure the Hose As to the Manifold with two 5P-8077 Half Flanges (F), four 8T-4140 Bolts (G), and four 8T-4122 Hard Washers (H).Torque the bolts to 240 40 N m (175 30 lb ft).
Carefully fill both pin joints with the appropriate lubricant. Continue to fill the joints until the lubricant is forced out of the pin seals.Note: DO NOT rely on the automatic lubrication system to fill the new pin joints.
Illustration 22 g06030561
Remove the plug in the rod end of the tilt cylinder.
Illustration 23 g06030589
Install the Adapter (24) into the head end of the cylinder. Seal the connection