ADAPTER-TIP 5054150 - Caterpillar

5054150 ADAPTER-TIP Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5054150
505-4150
5054150

Weight: 32 pounds 14 kg.

Buy ADAPTER-TIP 5054150 Caterpillar genuine, new aftermarket tractor parts with delivery

Compare Prices: .

As an associate, we earn commssions on qualifying purchases through the links below

Tinted Green Machine Pallet Stretch Film 20" x 5000' x 80 Ga Shrink Wrap 2 Rolls Plastic wrap Shrink wrap Cling wrap Packing Supplies for Moving Packing Supplies Stretch wrap Shrink wrap roll

$323.95

01 Jun 2021

US: Mi Cielito Stor

Tinted Green Machine Pallet Stretch Film 20" x 5000' x 80 Ga Shrink Wrap 2 Rolls Plastic wrap Shrink wrap Cling wrap Packing Supplies for Moving Packing Supplies Stretch wrap Shrink wrap roll
Mi Cielito Color machine wrap is ideal for pallet wrap machines and stretch wrap converters Plastic wrap for moving Shrink wrap for moving Stretch wrap for moving Furniture wrapping for moving Packing wrap || Ideal for pallet wrap machines and stretch wrap converters Packing material || Stretch wrap is the ideal product to use when bundling and moving.

Number on catalog scheme: 10B

Caterpillar 5054150 Parts scheme ADAPTER-TIP

For full view, you need register

Information:

1. Clean the surfaces on the cylinder block for the main bearings. Install the upper halves of the main bearings in the block.2. Put the crankshaft in position in the cylinder block with a hoist. Make sure all of the timing marks are in alignment.3. Clean the Nos. 1 and 5 main bearing caps. Install new bearings in caps. Temporarily install caps to hold crankshaft in place.
Make sure part number on cap is toward front of engine, and number on bottom of cap is the same as number on block when caps are installed.
4. Clean the Nos. 2, 3 and 4 main bearing caps. Install new bearings in the caps. Put clean engine oil, bolts threads and surfaces of the washers that make contact with the caps.5. Check the bearing clearance with Plastigage (A). Install the caps and tighten the bolts to a torque of 30 3 lb.ft. (40 4 N m). Put a mark on each bolt head and the bearing caps. Tighten the bolts 90° more. Remove the bearing caps and measure the thickness of the Plastigage. The main bearing clearance (Plastigage thickness) with new bearings must be .0029 to .0069 in. (0.074 to 0.165 mm). The maximum permissible clearance with used bearings is .010 in. (0.25 mm).6. Put clean engine oil on the bearings. Put the caps in position on the engine and install the washers and bolts. Tighten the bolts to a torque of 30 3 lb.ft. (40 4 N m). Put a mark on each bolt head and the bearing caps. Tighten the bolts 90° more.7. Remove the Nos. 1 and 5 main bearing caps. Follow the procedure in Steps 4 and 5 and check the main bearing clearance for the Nos. 1 and 5 main bearings.8. Follow the procedure in Step 6 and install the No. 1 main bearing cap.9. Put clean engine oil on thrust bearings (1). Install the bearings with the tab into the machined area in the cylinder block. Install the No. 5 main bearing cap. Tighten the bolts for the cap with the procedure in Step 6.10. Check the crankshaft end play with tool group (B). The end play is controlled by the thrust bearings on the No. 5 main. The end play with new bearings must be .0025 to .0145 in. (0.064 to 0.368 mm). The maximum permissible end play with used bearings is .025 in. (0.64 mm). If a replacement has been made for any of the timing gears, it will be necessary to check the engine timing to make sure it is correct. See TIMING MAGNETO TO ENGINE in TESTING AND ADJUSTING.end by:a) install pistonsb) install timing gear coverc) install flywheel housing