ADAPTER 5107062 - Caterpillar

Illustration 1 g02791879
Engine Coolant (1) - The engine coolant gauge will indicate in the red zone and the action light will flash when the engine coolant temperature is too high. Stop the machine at a convenient location and investigate the cause.
Hydraulic Oil Temperature Indicator (2) (If Equipped) - The hydraulic oil temperature indicator will illuminate when the hydraulic oil reaches 110° C (230° F). Action light (11) will also illuminate. Operation of the hydraulic functions must be reduced in order to allow the hydraulic fluid to cool.
Torque Converter Temperature Indicator (3) - The torque converter temperature indicator will illuminate when the torque converter temperature exceeds121° C (250° F). Action light (11) will also illuminate and the action alarm will sound. Stop the machine at a convenient location and investigate the cause. The torque converter temperature indicator will flash when there is a fault with the torque converter temperature sensor.
Brake System Indicator (4) - The brake system indicator will illuminate when there is a low brake pressure. The indicator will always illuminate when the engine is not running. When the engine is running and there is a fault the indicator will illuminate and the action light (11) will illuminate and the action alarm will sound. Stop the machine at a convenient location and investigate the cause. Stop the machine at a convenient location and investigate the cause. Tachometer (5) - The tachometer will indicate the engine RPM.
Engine Oil Pressure Indicator (6) - When the engine oil pressure is low, the following will happen: the alert indicator will illuminate, action light (11) will flash and an audible alarm will sound. If this alert indicator illuminates, stop the machine immediately. Stop the engine, engage the parking brake and investigate the cause.
Charging System Indicator (7) - The alert indicator illuminates if there is a malfunction in the electrical charging system. If this alert indicator illuminates, the system voltage is too low for normal machine operation.
Fuel Level (8) - The fuel level gauge will indicate in the red zone when the fuel level is 12.5% of the tank capacity.
Low Fuel Indicator (9) - The low fuel indicator will illuminate when the fuel level is at 12.5% of the tank capacity. The indicator will flash when there is a fault with the fuel level sender.
Hydraulic Oil Filter Bypass Indicator (10) (If Equipped) - The hydraulic filter bypass indicator will illuminate when the hydraulic oil temperature is above 42° C (108° F) and hydraulic oil is bypassing the hydraulic filter. Action light (11) will also illuminate.
Action Light (11) - Malfunction in a machine system. LCD (12) - The LCD will display the hour meter. The LCD will also display a fault when a fault is present. The fault code list is as follows:
271-05 Action alarm current below normal
271-06 Action alarm current above normal
Fuel System Water Separator Indicator (13) - The alert indicator indicates a plugged fuel/water separator. Action light (11) will also illuminate. Stop the engine, drain the water from the separator, then restart the