ADAPTER 5450654 - Caterpillar

Removal Procedure
Start By:
Separate the hydraulic rotator and the shear housing. Refer to Disassembly and Assembly, "Separate Hydraulic Rotator and Shear Housing".
Table 1
Required Tooling    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Bracket     2    
Illustration 1 g01196185
Note the position of the "S" mark for the assembly purpose.
Illustration 2 g01196188
Attach Tooling (A) and a suitable lifting device to ring gear and bearing assembly (1). The weight of ring gear and bearing assembly (1) for the S365C is approximately 204 kg (450 lb). The weight of ring gear and bearing assembly (1) for the S385C is approximately 363 kg (800 lb). Remove bolts (2) and remove ring gear and bearing assembly (1) .Installation Procedure
Table 2
Required Tooling    
Tool     Part Number     Part Description     Qty    
A     138-7575     Link Bracket     2    
B     155-0695     Thread Lock Compound     1    
Illustration 3 g01196188
Illustration 4 g01196185
Attach Tooling (A) and a suitable lifting device to ring gear and bearing assembly (1). The weight of ring gear and bearing assembly (1) for the S365C is approximately 204 kg (450 lb). The weight of ring gear and bearing assembly (1) for the S385C is approximately 363 kg (800 lb).
Position ring gear and bearing assembly (1). Note the position of the "S" mark. Apply Tooling (B) to bolts (2). Install bolts (2) and tighten bolts (2) for the S365C to a torque of 720 95 N m (530 70 lb ft). Tighten bolts (2) for the S385C to a torque of 1220 135 N m (900 100 lb ft).End By: Connect the hydraulic rotator and the shear housing. Refer to Disassembly and Assembly, "Connect Hydraulic Rotator and Shear Housing".