ADAPTER KT 5618467 - Caterpillar

Illustration 1 g00949285
Note: All bores must be free of paint. Coat all bores for pins with lubricant. (1) Two 4I-4811 Pin Assemblies Diameter after plating ... 69.850 0.025 mm (2.7500 0.0010 inch) Minimum thickness for plating ... 0.005 mm (0.0002 inch) Bore diameter ... 70.037 0.037 mm (2.7574 0.0015 inch) (2) Two 163-3744 Sleeve Bearings Outside diameter ... 106.142 0.008 mm (4.1788 0.0003 inch) Inside diameter ... 90.280 0.020 mm (3.5543 0.0008 inch) Install the bearing in the bearing bore. ... 9.5 0.8 mm (0.37 0.03 inch) (3) Two 163-3749 Sleeve Bearings Outside diameter ... 85.160 0.013 mm (3.3527 0.0005 inch) Inside diameter ... 70.267 0.037 mm (2.7664 0.0015 inch) Install the bearing in the bearing bore. ... 7.5 0.8 mm (0.30 0.03 inch) (4) Two 143-3834 Sleeve Bearings Outside diameter ... 85.160 0.013 mm (3.3527 0.0005 inch) Inside diameter ... 70.230 + 0.074 - 0.0000 mm (2.7650 + 0.0029 - 0.0000 inch) Install the bearing in the bearing bore. ... 7.5 0.8 mm (0.30 0.03 inch) (5) Torque for the two bolts ... 325 40 N m (240 30 lb ft) (6) Lubricate the sealing lip slightly with the lubricant that is being sealed. Install the seal so that the lip faces outward. Do not allow the seal to extend past the face of the boss.