ADAPTER G 5S0835 - Caterpillar

Illustration 28 g00577032
Remove guide (41), shims (42), and spring assembly (43) from barrel (38) .
Illustration 29 g00577089
Use Tooling (B) to remove retaining ring (44) from shaft assembly (45) and motor housing (37) .
Illustration 30 g00577092
Use a soft hammer to drive shaft assembly (45) from motor housing (37) .
Illustration 31 g00577114
Remove cover (46) from shaft assembly (45) .
Illustration 32 g00577116
Remove seal (47) from cover (46) .
Illustration 33 g00577118
Use Tool (A) to remove retaining ring (48) from shaft assembly (45) .
Illustration 34 g00577120
Illustration 35 g00577121
Use a press to remove bearing (49) and spacer (50) from shaft (45) .
Illustration 36 g00577156
Remove swashplate (51) from motor housing (37) .
Illustration 37 g00577157
Remove plate (52) from swashplate (51) .
Illustration 38 g00577158
Remove machine screws (53). Remove retainer plate (54) and plunger (55) from swashplate (51) .
Illustration 39 g00577160
If necessary, remove stopper (56) and pin (57) from swashplate (51) .
Illustration 40 g00577635
Remove valve cartridge (58) from motor housing (37) .
Remove two pistons (59) from the motor housing.
Remove the two machine screws (60) and bearings (61) from the motor housing.
Illustration 41 g00577571
Remove seal (62) from rod assembly (35) .
Illustration 42 g00577636
Remove rings (64) from valve cartridge (66) .
Remove seals (63) and (65) from the valve cartridge.