ADAPTER 7C1958 - Caterpillar

Illustration 1 g00947421
Typical example C2.2 is shown.Safety messages on the enclosure
Illustration 2 g00949565
Typical example C2.2 is shown.
Illustration 3 g01039983
Typical example C2.2 is shown.
Illustration 4 g01040209
Typical example C2.2 is shown.
Illustration 5 g01040635
Control panelThere may be several specific safety messages on an engine. The exact location of the hazards and the description of the hazards are reviewed in this section. Please become familiar with all safety messages.Ensure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if the words cannot be read or if the pictures are not visible. When the safety messages are cleaned, use a cloth, water, and soap. Do not use solvent, gasoline, or other harsh chemicals to clean the safety messages. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety messages. The safety messages that are loosened could drop off of the engine.Replace any damaged safety messages or missing safety messages. If a safety message is attached to a part that is replaced, install a new safety message on the replacement part. Any Caterpillar dealer can provide new safety messages.Do Not Operate Before Reading the Manual (1)This message is located on the enclosure by the control panel.
g00934493
Do not operate or work on this engine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Automatic Starting (2)This message is located on the enclosure on the large panel.
g00950254
Generator on Standby! When the generator is on standby, the engine can start automatically at any time. Stay clear of the engine when the generator is on standby to prevent personal injury or death.
Improper Lifting (3)This message is located on top of the enclosure.
g00950274
Crushing Hazard! Improper lifting could cause serious injury or death. Follow the lifting instructions in the Operation and Maintenance Manual for safe lifting procedures.
Fire (4)This safety message is positioned on the side of the enclosure.
g00950811
Fire Hazard! Stop the Engine. Do not open the service doors if a fire exists. Opening the service doors if a fire exists could result in personal injury or death. Read and understand the instructions in the Operation and Maintenance Manual.
Refer to Operation and Maintenance Manual, "Fire Prevention and Explosion Prevention" for more information.Ether (5)This safety message is positioned on the intake for the air cleaner.
g00931562
Do not use ether. This machine is equipped with glow plugs. Using ether can create explosions or fires that can cause personal injury or death. Read and follow the engine starting procedure in the Operation and Maintenance Manual.
Refer to Operation and Maintenance Manual, "Fire Prevention and Explosion Prevention" for more information.Electrocution (6)
This safety message is positioned on both sides of the generator.
g01037912
DANGER: Shock/Electrocution Hazard-Do not operate this equipment or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings will