ADAPTER 7E3060 - Caterpillar

Intended Use
The intended use of this machine is for excavating with a bucket or working with approved work tools. The machine should be operated with the undercarriage in a stationary position since the upper structure is normally capable of 360 degree swing with mounted equipment. This machine can be used in object handling applications that are within the lift capacity of the machine. When this machine is used in object handling applications, ensure that the machine is properly configured and operated properly. Obey any local governmental regulations and regional governmental regulations. Only lift objects from approved lifting points and with approved lifting devices.Application/Configuration Restrictions
The maximum travel operating slope for machine lubrication is 35 degrees.Specification Data
Illustration 1 g03863012
Table 1
352F Excavator(1)
Approximate Weight 50200 kg (110200 lb)
Overall Length (A) 16455 mm (54 ft 0 inch)
Overall Height (B) 3733 mm (12 ft 3 inch)
Swing Radius (C) 3730 mm (12 ft 3 inch)
Height of Cab (D) 3390 mm (11 ft 2 inch)
Ground Clearance (E) 744 mm (2 ft 5 inch)
Length to centers of rollers (F) 4338 mm (14 ft 3 inch)
Length of Track (G) 5347 mm (17 ft 6 inch)
Overall Width (H) 4508 mm (14 ft 9 inch)
Track Shoe Width (I) 750 mm (2 ft 6 inch)
(1) These specifications are for a machine that has a 11.5 m (37 ft 9 inch) reach boom, a 8.5 m (27 ft 11 inch) stick, a 1.19 m3 (1.56 yd3 ) bucket, and a 10 percent full fuel tank.Working Ranges
Illustration 2 g03814987
Table 2
Working Ranges
Maximum Digging Depth
(A) 13040 mm (42 ft 9 inch)
Maximum Reach at Ground Level
(B) 19640 mm (64 ft 5 inch)
Maximum Cutting Height
(C) 14700 mm (48 ft 3 inch)
Maximum Loading Height
(D) 12030 mm (39 ft 6 inch)
Bucket Tip Radius 1570 mm (5 ft 3 inch)