ADAPTER- 7T7709 - Caterpillar

Towing with a Running Engine
If the engine is running, the machine can be towed for a short distance under certain conditions. The power train and the steering system must be operable. Tow the machine for a short distance only. For example, pull the machine out of mud or pull the machine to the side of the road.The operator on the towed machine must steer the machine in the direction of the tow line.If the steering system is inoperable use the secondary steering system to steer the machine. Refer to Operation and Maintenance Manual, "Secondary Steering".Comply with all of the instructions that are outlined in this topic.Towing with a Stopped Engine
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the work tools have been lowered to the ground, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide"for tools and supplies to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations.
When the disabled machine's engine is stopped, perform the following steps before you tow the machine.
Engage the parking brake and chock the wheels.
Illustration 3 g00415378
Reverse the hydraulic steering hose connections on one cylinder only.