ADAPTER 8J8928 - Caterpillar

Table 1
APPROXIMATE REFILL CAPACITIES
Compartment or System Liters US gal Imperial gallon
Cooling System 51 13.4 11.2
Fuel Tank 415 109.6 91.3
Diesel Exhaust Fluid (DEF) (If equipped) 17 4.5 3.7
Engine Crankcase and Filter 24.6 6.5 5.4
Power Train Oil System 148 39.1 32.6
Hydraulic Oil Tank 100 26.4 22
Final Drives 13.5 3.6 3.0
Winch Case (Boom) 11.3 3.0 2.5
Winch Case (Hook) 15.1 4.0 3.3
kg lbs Type
Refrigerant(1) 2.5 5.5 R-134a
mL oz Type
Refrigerant Oil(1) 226 7.6 PAG(2) Oil
(1) Refer to Service Manual, UENR4125, "Air Conditioning and Heating R-134a for All Caterpillar Machines" for additional information
(2) PAG is the abbreviation for Polyalkylene GlycolNote: When you are operating on severe slopes (greater than 25 degrees or greater than 47 percent), the quantity of oil in the power train can be increased by as much as 10 percent. When you are operating with the increased oil quantity, prolonged operation in some machines can cause high power train oil temperatures. After the work on the severe slopes has been completed, drain the excessive oil quantity from the bevel gear case.Note: For severe slope operation, engine oil should be maintained on the full mark. The engine should never be overfilled with oil.Ecology Drains
Table 2
Ecology Drain (Components)
Location (Drain) Needed Component
Coolant None
Transmission 12.7 mm (0.5 inch)
pipe with 1/2-14 NPTH thread
Torque Converter 12.7 mm (0.5 inch)
pipe with 1/2-14 NPTH thread
Engine Oil (If equipped) 25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread
Hydraulic Tank 126-7914 Oil Drain Coupling
or
25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread
Bevel Gear Case 4C-8563 Oil Drain Coupling
or
25.4 mm (1 inch) pipe with 1-11 1/2 NPTH thread