ADAPTER-RAM 8S9975 - Caterpillar

Flow Meter Tee Test Procedure - II
SCHEMATIC OF HYDRAULIC SYSTEM WITH FLOW METER INSTALLED 1. Inlet valve group.2. Main relief valve.3. Implement pump section.4. Steering pump section.5. Hydraulic tank.6. Oil filter.7. Margin stem.8. Unloading valve.9. Filter bypass valve.10. Tilt cylinder.11. Makeup and relief valve for head end of tilt cylinder.12. Makeup and relief valve for rod end of tilt cylinder.13. Shuttle valve.14. Tilt control valve.15. Tilt valve spool.16. Load check valve.17. Priority flow control valve.18. Makeup valve.19. Makeup valve.20. Shuttle valve.21. Lift cylinders.22. Lift control valve.23. Lift valve spool.24. Load check valve.25. Signal loading valve.A2. Pump supply line adapter.B. Flow meter assembly.C5. Connecting hose assembly.D6. Return line assembly.F4. Blocking plate assembly.F8. Plug and cap assembly.
FLOW METER INSTALLED (See Tee Test Tooling Chart for Parts Reference)
IMPLEMENT PUMP SUPPLY LINE ADAPTER INSTALLED
RETURN LINE ASSEMBLY INSTALLED
TACHOMETER DRIVE INSTALLED (See Tee Test Tooling Chart for Parts Reference)
ELECTRICAL LEADS CONNECTED (See Tee Test Tool Chart for Parts Reference)
BLOCKING LOCATION FOR PUMP TEST (See Tee Test Tool Chart for Parts Reference)
BLOCKING LOCATION FOR LIFT CYLINDERS (LEFT SIDE SHOWN) (See Tee Test Tool Chart for Parts Reference)
BLOCKING LOCATION FOR TILT CYLINDER (See Tee Test Tool Chart for Parts Reference)