8T7908 ADAPTER Caterpillar parts
315D L, 574, 574B, CB-14
Rating:
Alternative (cross code) number:
CA8T7908
8T-7908
8T7908
CA8T7908
8T-7908
8T7908
Weight: 0.010 pounds 0 kg.
Information:
ORIFICE SIZE
0
OVERALL LENGTH
32.5
mm
PIPE DASH SIZE
0
PIPE THREAD SIZE
.12-28BSPP
STOR DASH SIZE
4
STOR THREAD SIZE
.44-20
EXCAVATOR, VIBRATORY COMPACTOR,
Compatible equipment models: 8T7908:
Number on catalog scheme:
3
For full view, you need register
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g01093340
Disconnect harness assembly (6) for the coolant temperature sensor.
Disconnect hose (3) from housing manifold (2).
Remove bolts (4). Remove pipe (5), water temperature regulator housing (1), and housing manifold (2).
Illustration 2 g01093551
Remove water temperature regulator housing (1) from housing manifold (2). Remove O-ring seal (8) and O-ring seal (7) from the housing manifold.
Remove water temperature regulator (9).
Remove lip seal (11).
Remove pipe (5) from the water temperature regulator housing. Remove O-ring seals (10). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 221-8647 Seal Installer Gp 1
B 1U-6396 O-Ring Assembly Compound -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g01093551
Use Tooling (A) to install lip seal (11) in water temperature regulator housing (1).
Install O-ring seals (10) on pipe (5). Apply Tooling (B) to the O-ring seals. Install the pipe in the water temperature regulator housing.
Install O-ring seal (7) and O-ring seal (8) on housing manifold (2).
Install water temperature regulator (9) in the water temperature regulator housing.
Illustration 4 g01093340
Install pipe (5) in the water pump. Position water temperature regulator housing (1) and housing manifold (2) and install bolts (4).
Connect hose (3).
Connect harness assembly (6) for the coolant temperature sensor.
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Drain the coolant from the cooling system into a suitable container for storage or for disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Illustration 1 g01093340
Disconnect harness assembly (6) for the coolant temperature sensor.
Disconnect hose (3) from housing manifold (2).
Remove bolts (4). Remove pipe (5), water temperature regulator housing (1), and housing manifold (2).
Illustration 2 g01093551
Remove water temperature regulator housing (1) from housing manifold (2). Remove O-ring seal (8) and O-ring seal (7) from the housing manifold.
Remove water temperature regulator (9).
Remove lip seal (11).
Remove pipe (5) from the water temperature regulator housing. Remove O-ring seals (10). Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 221-8647 Seal Installer Gp 1
B 1U-6396 O-Ring Assembly Compound -
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g01093551
Use Tooling (A) to install lip seal (11) in water temperature regulator housing (1).
Install O-ring seals (10) on pipe (5). Apply Tooling (B) to the O-ring seals. Install the pipe in the water temperature regulator housing.
Install O-ring seal (7) and O-ring seal (8) on housing manifold (2).
Install water temperature regulator (9) in the water temperature regulator housing.
Illustration 4 g01093340
Install pipe (5) in the water pump. Position water temperature regulator housing (1) and housing manifold (2) and install bolts (4).
Connect hose (3).
Connect harness assembly (6) for the coolant temperature sensor.
Fill the cooling system. Refer to Operation and Maintenance Manual, "Cooling System Coolant - Change".
Caterpillar parts catalog:
Parts adapter Caterpillar catalog:
10 FT, 10-20B, 10B, 120G, 120H, 120H ES, 120H NA, 120M 2, 12G, 12H, 12H NA, 12M 2, 130G, 135H, 135H NA, 140G, 140H, 140H NA, 140M 2, 14G, 14H, 14M, 160G, 160M 2, 16G, 16H, 16M, 205B, 214B, 216B3, 224B...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12G, 12K, 12M, 130G, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 14G, 14H, 14M, 160K, 160M, 16G, 16H, 16H NA, 225, 245, 245B, 24H, 24M, 272D XHP, 299D XHP, 30/...
120G, 120H, 120M, 120M 2, 12G, 12H, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 140G, 140H, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14G, 14H, 14M, 160G, 160H, 160M, 160M 2, 160M 3, 160M 3 AWD, 163H, 16G...
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12H, 12H NA, 12K, 12M, 135H, 135H NA, 140G, 140H, 140H NA, 140K, 140K 2, 140M, 143H, 14H, 160H, 160K, 163H, 16H, 16M, 215D, 225, 225D, 229, 229D, 231D, 235,...
120H, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 143H, 14H NA, 14M, 160H, 160H ES...
311C, 311D LRR, 311F LRR, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313B, 313D, 313D2, 314C, 314D LCR, 314E CR, 314E LCR, 315, 315B, 315B L, 315C, 315D L, 316E L, 317, 317B LN, 318...
315B, 315B FM L, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 319C, 320, 320 L, 320B, 320B L, 320B U, 320C, 320C L, 320D, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E...
315B, 315B FM L, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 319C, 320, 320 L, 320B, 320B U, 320C, 320C L, 320D, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E LN, 321B, 321...
315B, 315B FM L, 315C, 315D L, 316E L, 318B, 318C, 318D L, 318D2 L, 319C, 320, 320 L, 320B, 320B U, 320C, 320C L, 320D, 320D GC, 320D L, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E LN, 321B, 321...
2133257
ADAPTER-FAN
550B, 554, 560B, 564, 574B
550B, 554, 560B, 564, 574B
2223275
ADAPTER
564, 574B
564, 574B
1700467
ADAPTER AS
564, 574B
564, 574B
7C5882
ADAPTER-PUMP
235B, 572R, D6H, D6H XL, D6H XR, D6R, D7R
235B, 572R, D6H, D6H XL, D6H XR, D6R, D7R
235B, 572R, 578, 583R, D6H, D6H XL, D6H XR, D6R, D7H, D7R, D8N
2933012
ADAPTER
235B
235B
303.5E, 303E CR, 304E, 305.5E, 305E, 306
3535139
ADAPTER AS
305.5E, 306, 306E, 586C, 725, 725C, 730, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 824K, 825K, 826K, D6T LGP, D6T XL, D7E, D7E LGP, PM-200, PM-201
305.5E, 306, 306E, 586C, 725, 725C, 730, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 824K, 825K, 826K, D6T LGP, D6T XL, D7E, D7E LGP, PM-200, PM-201
306, 627H, 777G, D11R, D11T
3507501
ADAPTER
316E L, 318E L, 320D GC, 320D L, 320D2, 320E, 320E L, 320E LN, 323D L, 323E L
316E L, 318E L, 320D GC, 320D L, 320D2, 320E, 320E L, 320E LN, 323D L, 323E L
3289815
ADAPTER-ELBOW
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
3661893
ADAPTER
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
M313D, M315D, M315D 2, M316D, M317D 2, M318D, M318D MH, M322D, M322D MH
1572027
ADAPTER
315D L
315D L
1552478
ADAPTER
315D L, 770G, 770G OEM, 772G, 772G OEM, 773F, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 844, 844H, 854G, 854K, 950G II, 962G II, 988G, 988H, 992K, MH3037, MH3049, MH3059
315D L, 770G, 770G OEM, 772G, 772G OEM, 773F, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 844, 844H, 854G, 854K, 950G II, 962G II, 988G, 988H, 992K, MH3037, MH3049, MH3059
315D L, 584, 906H, 908H, 914G, 938G, BA30, CB-224C, CB-535B, CB-544, CB-545, HA771, HA871, HM825, IT12B, IT14G2, IT18B, IT28B, IT38F, IT38G, IT38G II, IT62G, M325D L MH, M325D MH, MD-250, PF-300C, PS-...