ADAPTER 8W5179 - Caterpillar

2. Fasten axle housing (2) to the fork of a lift truck as shown.3. Remove nuts (1) and washers that hold the housing in position. Remove the housing. The weight of the housing is 422 lb. (190 kg). 4. Check O-ring seal (3) for damage. If the seal has damage, use a new part for replacement.Install Axle Housings
1. Install O-ring seal (1) on the axle housing. 2. Fasten axle housing (2) to the fork of a lift truck. Put the housing in position on the studs in the differential case.3. Put 9M3710 Anti-Seize Compound on the threads of the studs. Install the nuts that hold the axle housing in position. Tighten the nuts to a torque of 220 10 lb.ft. (295 14 N m).4. Fill the differential case with oil to the correct level. See Lubrication and Maintenance Guide.end by:a) install brake camshafts and slack adjustersb) install brake shoes and brake drums