ADAPTER 9J4941 - Caterpillar

Removal Procedure
Start By:
Remove the front center bottom guard and the rear bottom guard.
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty.    
A     -     Loctite 587     1    
Refer to Operation and Maintenance Manual, "Engine Oil and Filter - Change" for the correct draining and filling procedures.
Illustration 1 g02682799
Disconnect harness assembly (1) and hose assemblies (2) .
Illustration 2 g02682803
Remove bolts (3) and engine oil pan (4) .
Illustration 3 g02682838
Remove bolts (5) and pan (6). Remove bolts (7) and support (8) .
Illustration 4 g02682856
Remove bolts (9) and pan (10) .
Illustration 5 g02682896
Remove bolts (11) and tube assembly (12) .
Illustration 6 g02682919
Remove bolts (13) and inlet (14) .
Illustration 7 g02682980
Remove bolts (14) and plate (15) .Installation Procedure
Install engine oil pan (4) in the reverse order of removal.
Apply Tooling (A) to the top of the oil pan joints.