ADDITIVE 8C3680 - Caterpillar

Illustration 1 g00909598
(1) 105-7366 Sleeve Bearing Outside diameter ... 85.16 0.013 mm (3.353 0.0005 inch) Inside diameter ... 70.23 0.020 mm (2.765 0.0008 inch) Installation depth ... 10.0 0.5 mm (0.39 0.02 inch) (2) Bore of cylinder ... 109.9 0.25 mm (4.33 0.010 inch) (3) Rod assembly Diameter of rod ... 79.93 0.030 mm (3.147 0.0012 inch) Minimum thickness for plating ... 0.020 + 0.100 - 0.006 mm (0.0008 + 0.0039 - 0.0002 inch) (4) Bore of head ... 88.018 0.018 mm (3.4653 0.0007 inch) (5) 190-5335 Sleeve Bearing Outside diameter ... 85.16 0.013 mm (3.353 0.0005 inch) Inside diameter ... 70.23 0.020 mm (2.765 0.0008 inch) Installation depth ... 7.5 0.3 mm (0.30 0.01 inch) (6) 143-8150 Special Locknut Lubricate the face and threads before assembly. Torque for locknut ... 4500 230 N m (3319 170 lb ft) (7) Lubricate the inside diameter and the outside diameter of the rings and the seal with clean grease. (8) The slit of the ring must turn in the direction of the piston. (9) Lubricate the sealing lip slightly with the lubricant that is being sealed.