ADJUSTER GP-BUCKET 2506418 - Caterpillar

may be several specific safety messages on your engine. The exact location and a description of the safety messages are reviewed in this section. Please become familiar with all safety messages.Ensure that all of the safety messages are legible. Clean the safety messages or replace the safety messages if the words cannot be read or if the illustrations are not visible. Use a cloth, water, and soap to clean the safety messages. Do not use solvents, gasoline, or other harsh chemicals. Solvents, gasoline, or harsh chemicals could loosen the adhesive that secures the safety messages. The safety messages that are loosened could drop off of the engine.Replace any safety message that is damaged or missing. If a safety message is attached to a part of the engine that is replaced, install a new safety message on the replacement part. Your Caterpillar dealer can provide new safety messages.
Illustration 1 g01862154
View of the right side of a typical C12 Marine Engine
Illustration 2 g01862153
View of the left side of a typical C12 Marine Engine
Universal Warning (1)One safety message is located on the valve cover base in front of the connector for the ECM on the left side of the engine. One safety message is located on the front valve cover base on the right side of the engine.
Illustration 3 g01370904
Do not operate or work on this engine unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings could result in injury or death. Contact any Caterpillar dealer for replacement manuals. Proper care is your responsibility.
Hot Fluid Under Pressure (2)This safety message is located on the expansion tank in front of the filler neck.
Illustration 4 g01371640
Pressurized system! Hot coolant can cause serious burns, injury or death. To open the cooling system filler cap, stop the engine and wait until the cooling system components are cool. Loosen the cooling system pressure cap slowly in order to relieve the pressure. Read and understand the Operation and Maintenance Manual before performing any cooling system maintenance.
Explosion Hazard (3)This safety message is located on the cover for the air cleaner.
Illustration 5 g01372254
Explosion hazard! Do not use ether! This machine is equipped with an air inlet heater. Using ether can create explosions or fires that can cause personal injury or death. Read and follow the starting procedure in the Operation and Maintenance Manual.